Mobil 1 M1C-260A Engine Oil Filter

Mobil 1 M1C-260A Engine Oil Filter

The Mobil 1 M1C-260A is a cartridge-style engine oil filter for select Volvo applications, including S60, S90, V60, XC60, XC90, and related models. Built for modern synthetic-oil service, it uses a metal-free cartridge design with the dimensions and sealing layout needed for the listed Volvo fitments.

Key Features

• Cartridge lube metal-free filter design for select Volvo engines
• Height: 4.13 in. with 3.22 in. outside diameter
• Bottom outside diameter: 2.87 in.; top outside diameter: 3.23 in.
• Bottom inside diameter: 0.95 in. (24 mm); inner diameter bottom: 0.52 in.
• Includes 2 O-rings for sealing service points
• No anti-drain back valve and no bypass relief valve
• Cross-references Wix WL10241 and Baldwin P40134 for the same application

Detailed Description

Mobil 1 M1C-260A is an engine oil filter cartridge built for direct replacement in a wide range of Volvo passenger vehicles and SUVs. It is listed for 2012-2025 Volvo S60, 2018-2025 Volvo S90, 2019-2025 Volvo V60, 2018-2025 Volvo XC40, 2018-2025 Volvo XC60, 2018-2025 Volvo XC90, and additional Volvo applications shown in the fitment data. This part number is also referenced as M1C-260A in catalog listings, making it easier to verify the correct filter during maintenance.

The filter’s cartridge construction and metal-free style suit synthetic oil service applications, including Volvo models where a premium filter is recommended. Its listed dimensions and dual O-ring sealing setup help match the original service requirements for the specified engines. If you are searching for a Volvo S60 oil filter, Volvo XC60 oil filter, or Volvo XC90 cartridge filter, M1C-260A is the cataloged part to check against your VIN and engine code.

Common Service Issues It Can Address

• Replacing a clogged or restricted oil filter element
• Restoring proper oil filtration during routine maintenance
• Correcting a filter mismatch on listed Volvo synthetic-oil applications
• Addressing oil service intervals where a premium cartridge filter is specified
• Replacing worn sealing rings during filter service

Installation Notes and Tips

Verify the vehicle’s year, model, engine, and filter housing before installation. This cartridge filter uses 2 O-rings, so inspect the housing and sealing surfaces carefully and replace the seals during service. Because the design does not use an anti-drain back valve or bypass relief valve, confirm the application matches the factory filter specification before installation. For best results, follow the Volvo service procedure and torque guidance for the filter cap and housing.

Quality Assurance

Mobil 1 is a recognized name in automotive filtration and lubrication products, and this filter is cataloged for the listed Volvo applications with OE-style fitment data. Confirm compatibility against the vehicle’s exact model year and engine before ordering.