/live/media/MO/MO_382_Top.jpg)
OE Quality
60-Day Returns
Moog 382 Universal Joint
MOOG 382 Heavy Duty Universal Joint
MOOG 382 is a greaseable universal joint for driveline and axle service, built with 4 round plain bearings and matching 1.3-inch bearing cap diameters on both axes. It is a practical OE-style replacement for Isuzu driveline repair work, with a center cross lube fitting positioned at an angle for easier servicing.
Key Features
- Part number 382 universal joint for drive shaft service
- 4 round plain bearings for consistent bearing support
- Greaseable design with angled center cross lube fitting
- Outside-of-bearing length: 3.662 in. (93.0 mm) on both axes
- Bearing cap diameter: 1.3 in. (33.0 mm) on both axes
- OE series reference: Isuzu
Detailed Description
MOOG 382 is a heavy duty universal joint engineered for driveline applications where smooth torque transfer and serviceability matter. The 3.662-inch outside-of-bearing length on both axes and 1.3-inch bearing cap diameter on both axes make it important to match the original dimensions before installation. This part number 382 is listed with an OE series reference for Isuzu, and it cross-references 45U2204 and 2200066 for the same application.
For Isuzu drive shaft repair, MOOG 382 provides a greaseable service design that supports routine maintenance. The round plain bearing construction and angled lube fitting help simplify lubrication access during driveline service.
What It Helps Repair
- Driveline vibration caused by worn universal joint bearings
- Clunking or driveline lash during acceleration or deceleration
- Need for a serviceable, greaseable replacement joint
- Loose or noisy drive shaft operation in Isuzu applications
- Wear at the drive shaft universal joint bearing caps
Installation Notes and Tips
Verify bearing cap diameter, overall length, and bearing type against the original joint before installation. The length measurement is outside of bearing to outside of bearing, so measure the existing joint the same way for an accurate match. Use the angled center cross lube fitting to service the joint after installation and during routine driveline maintenance. For Isuzu drive shaft applications, confirm the OE series reference and driveline dimensions before assembly.
Quality Assurance
MOOG backs this heavy duty universal joint with material selection and testing focused on dependable driveline performance. The brand’s problem-solving design approach is reflected in the greaseable layout and service-friendly lube fitting. Part number 382 is built for straightforward replacement in Isuzu driveline service.
| Brand | Moog |
|---|---|
| Part Number | 382 |
| Length Axis 1 | 3.662 |
| Length Axis 1 | 93.0 |
| Length Axis 2 | 3.662 |
| Length Axis 2 | 93.0 |
| Bearing Cap Type | 4 round plain bearings |
| Greaseable | Yes |
| Bearing Cap Axis 2 Diameter | 1.3 |
| Bearing Cap Axis 2 Diameter | 33.0 |
| Bearing Cap Axis 1 Diameter | 1.3 |
| Bearing Cap Axis 1 Diameter | 33.0 |
| Bearing Diameter A - Inch | 1.3 |
| Bearing Diameter A - mm | 33.0 |
| Bearing Diameter B - Inch | 1.3 |
| Bearing Diameter B - mm | 33.0 |
| Bearing Type A | Round plain |
| Bearing Type B | Round plain |
| Image | Ujoint_4plain.tif |
| Length A - Inch | 3.662 |
| Length A - mm | 93.0 |
| Length B - Inch | 3.662 |
| Length B - mm | 93.0 |
| Length Measurement A | Outside of bearing to outside of bearing |
| Length Measurement B | Outside of bearing to outside of bearing |
| Lube Fitting Location | Angled lube fitting in center of cross |
| Lubricateable | Yes |
| OE Series | Isuzu |
| U-Joint Identification | 4 round plain bearings |
This part fits 0 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.