MPA Electrical 10166 Alternator

Remanufactured Alternator for Honda Accord

MPA Electrical Part Number 10166 is a remanufactured alternator built for 2013-2017 Honda Accord applications. It delivers 110 amps at 12 volts and uses an internal regulator, internal fan, and a 7-groove serpentine pulley for a direct-fit charging system replacement.

For drivers searching for a remanufactured alternator for 2013 2014 2015 2016 2017 Honda Accord, Part Number 10166 provides the electrical output and mounting configuration needed for the original charging system layout.

Key Features

• 110 amp output for standard vehicle charging demand
• 12-volt alternator with internal voltage regulator
• Internal fan design for integrated cooling
• 7-groove serpentine pulley
• Clockwise rotation with 2:00 clock position
• Remanufactured by MPA Electrical
• Mitsubishi manufacturer design

Product Details

This MPA Electrical 10166 alternator is a remanufactured charging component for Honda Accord models from 2013 through 2017. It is specified with a Mitsubishi-style design, clockwise rotation, internal regulation, and a 7-groove serpentine pulley to match the vehicle’s accessory drive setup. The 110 amp rating supports the electrical demands of the Accord’s charging system while maintaining OE-style fitment characteristics.

MPA Electrical’s Remanufactured product line focuses on rebuilt electrical components for replacement use, making this alternator a practical option when the original unit has worn brushes, failed bearings, charging irregularities, or regulator issues. Part Number 10166 is also referenced by Davico Mfg 14488 for the same application.

Fits 2013-2017 Honda Accord, N/A.

Common Problems This Part Can Address

• Battery warning light caused by charging system failure
• Low or unstable system voltage
• Dim lights or electrical accessories operating inconsistently
• Noise from a worn alternator bearing or internal component wear
• Charging loss after alternator regulator or diode-related failure

Installation Notes and Tips

Verify pulley groove count, rotation, clock position, and connector alignment before installation. Confirm the vehicle uses a 12-volt charging system and compare the removed unit to Part Number 10166 for a proper match. After installation, check charging voltage at the battery and inspect belt condition and tension to help ensure correct operation.

Quality Assurance

This remanufactured alternator is built under MPA Electrical’s remanufactured product line and is intended as a replacement electrical component for the listed Honda Accord fitment. Cross-reference part numbers include Davico Mfg 14488 and 31100-5B0-Y02.