MPA Electrical BC182958 Disc Brake Caliper - Front Left

Remanufactured Brake Caliper Overview

This MPA Electrical disc brake caliper is a remanufactured replacement built for direct service on select Honda and Acura applications. It is a front left caliper with a floating design, cast iron body, and coated finish for dependable brake system restoration.

Fits 2007-2016 Honda CR-V, front left. Fits 2012-2015 Honda Crosstour, front left. Fits 2007-2012 Acura RDX, front left. Fits 2010-2011 Honda Accord Crosstour, front left. Fits 2005-2010 Honda Odyssey, front left.

Key Features

• Remanufactured caliper with QC checks throughout the rebuild process.
• Cast iron housing with a coated silver finish for corrosion resistance.
• Floating caliper design with 2 pistons for consistent brake actuation.
• Steel piston construction and cleaned threads for OE-style service fit.
• Mounting bracket and slides included; pads are not included.

Detailed Description

MPA Electrical remanufactures brake caliper cores through inspection and cleaning steps that remove heavily pitted or severely corroded units before rebuild. This caliper uses a cast iron casting, steel pistons, and a coated exterior to support long-term brake system service. The inlet thread diameter is 10.0 mm and the mounting hole diameter is 14.0 mm, which are important details when matching the correct brake caliper for the application. Part number BC182958 is listed for multiple Honda and Acura front left applications, including the Honda CR-V and Honda Odyssey.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

What It Helps Address

• Brake drag caused by a sticking or worn caliper.
• Uneven braking from piston or slide wear.
• Corrosion-related caliper failure.
• Loss of hydraulic sealing at the inlet connection.
• Brake noise or pull linked to caliper condition.

Installation Notes and Quality

Verify the front left position, inlet thread diameter, and mounting dimensions before installation. Pads are not included, so inspect related brake components during service and confirm the caliper slides and bracket align with the vehicle setup. Part number BC182958 is remanufactured at an IATF 16949 facility, with cleaned threads, inspected reusable steel components, and new rubber and friction-related service parts used during the rebuild process.

Quality control includes core inspection, material checks, final assembly inspection, and a go/no-go thread test before release.