MPA Electrical BC187028 Disc Brake Caliper - Rear Right

Rear Right Remanufactured Brake Caliper

MPA Electrical BC187028 is a remanufactured disc brake caliper for the rear right position on select Subaru applications. It is built for 2012-2020 Subaru Impreza, 2013-2015 Subaru XV Crosstrek, 2014-2018 Subaru Forester, and 2016-2020 Subaru Crosstrek models.

This BC187028 caliper is remanufactured with attention to sealing, corrosion resistance, and OE-style fitment details for Subaru rear brake service.

• Fits 2016-2020 Subaru Crosstrek, rear right
• Fits 2012-2020 Subaru Impreza, rear right
• Fits 2014-2018 Subaru Forester, rear right
• Fits 2013-2015 Subaru XV Crosstrek, rear right
• Remanufactured floating disc brake caliper
• Aluminum caliper casting with coated silver finish
• Steel piston construction
• Includes caliper slides and mounting bracket
• 10.0 mm inlet thread diameter
• Mounting hardware included
• No pads included

Remanufacturing Details

MPA Electrical remanufactures this brake caliper at an IATF 16949 facility using a multi-step inspection process. Cores with heavy pitting or severe corrosion are removed early in the process, while reusable steel components are cleaned and inspected before assembly. Aluminum calipers are machined at the inlet area to help maintain a tight seal, and all rubber components are material tested for quality. The caliper threads are cleaned and chased, then checked with a go/no-go test during final inspection. For Subaru Impreza, Subaru Forester, Subaru Crosstrek, and Subaru XV Crosstrek rear brake repair, BC187028 is built to restore proper caliper function and sealing performance.

Common Repair Uses

• Rear brake drag caused by a sticking caliper
• Brake fluid leakage at the caliper inlet or seals
• Uneven rear brake wear on the right side
• Corrosion-related caliper seizure or poor piston movement
• Noise or reduced braking performance from worn caliper components

Installation Notes

Confirm rear right placement, inlet thread size, and bracket style before installation. Transfer or replace brake pads as needed, and inspect the brake hose, slides, and mounting points for wear or corrosion. Bleed the brake system after installation and verify proper pedal feel and caliper movement. This part cross-references 26692FJ000 for the same application.

Quality Assurance

BC187028 is remanufactured under controlled quality checkpoints, with discarded cores removed before rebuild and final inspection performed before release. The caliper is coated for corrosion resistance and assembled with new rubber components and new friction-related hardware where specified in the remanufacturing process.