/live/media/MV/MV_BR75049G_Fro.jpg)
MPA Electrical BR75049G Disc Brake Rotor - Front
| Brand | MPA Electrical BR75049G |
|---|---|
| Position | Front |
| Discard Thickness | 1.47 |
| Discard Thickness | 37.4 |
| Nominal Thickness | 1.54 |
| Nominal Thickness | 39.0 |
| Disc Finish | Coated |
| Hat Finish | Coated |
| Rust Resistant Coating | Yes |
| Grade Type | Standard replacement |
| ABS Tone Ring Included | No |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Vented |
| Bearings Included | No |
| Finish | Coated |
| Product Condition | New |
| Fits | — |
Standard replacement. Disc brake rotor with OE-style vane design for efficient cooling.
Coated finish. Protective coating helps resist rust in harsh conditions.
Vented design. Promotes improved stopping power and reduced fade.
Cross-references HC3Z 1125-A for the same application. See all 1.
Black Series Coated Rotor Overview
MPA Electrical Black Series Coated Rotor BR75049G is a standard replacement disc brake rotor built for consistent stopping performance and reduced brake noise, vibration, and fade. Its vented design and smooth coated surfaces support dependable braking while helping protect the rotor from rust in harsh driving conditions.
For drivers searching for a coated brake rotor for Honda Civic or Toyota Corolla brake repair, BR75049G delivers OE-style construction with corrosion protection and cooling-focused vane design. The Black Series coating is made to hold up under high temperatures while maintaining a clean, protected finish.
Key Features
- Part number BR75049G
- Black Series Coated Rotor from MPA Electrical
- OE-style vane design for efficient cooling
- Vented disc brake rotor construction
- Coated disc and hat finish
- Rust-resistant coating for added corrosion protection
- Smooth surface type for consistent pad contact
- Standard replacement grade
- New product condition
Product Details
BR75049G is engineered as a vented disc brake rotor with a nominal thickness of 1.54 in. (39.0 mm) and discard thickness of 1.47 in. (37.4 mm). The coated finish on both the disc and hat helps resist rust, while the OE-style vane layout promotes airflow through the rotor to support heat management during repeated stops. This makes it a practical choice for routine brake service where stable pedal feel and predictable braking matter.
MPA Electrical’s Black Series Coated Rotor line focuses on replacement rotors with protective coatings and OE-style design details. If you are replacing worn rotors on a Honda Civic or Toyota Corolla, BR75049G provides a direct-fit style solution for brake maintenance where corrosion resistance and smooth operation are priorities. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems It Can Address
- Brake pulsation caused by worn or uneven rotor surfaces
- Noise during braking from damaged or heat-affected rotors
- Reduced stopping consistency from rotor fade under repeated use
- Rust buildup on exposed rotor surfaces and hat areas
- Cooling issues related to aging or inefficient rotor vane design
Installation Notes
Verify rotor dimensions, hub fitment, and brake pad condition before installation. Clean the hub mounting surface thoroughly to help prevent runout-related vibration. Replace pads if they are worn, glazed, or uneven, and follow the vehicle manufacturer’s torque specifications during assembly. Brake rotors should be installed on the correct axle position listed in the vehicle fitment data.
Quality Assurance
BR75049G is a new standard replacement rotor from MPA Electrical’s Black Series line. The coated finish is intended to provide extended rust protection, and the vented OE-style design supports consistent braking performance in everyday driving and repeated stop conditions.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||