/live/media/MV/MV_NM2738_Rig.jpg)
OE Quality
60-Day Returns
MPA Electrical NM2738 Brake Master Cylinder
Brake Master Cylinder for 1995 Jeep Wrangler
Restore consistent brake pedal response with this MPA Electrical brake master cylinder for the 1995 Jeep Wrangler with front disc brakes. Part number NM2738 is a standard replacement unit built with a 1-inch bore, aluminum housing, and an included reservoir and cap for a direct hydraulic service replacement.
Key Features
- Fits 1995 Jeep Wrangler, front disc brakes
- Standard replacement brake master cylinder
- 1-inch master cylinder bore diameter
- Aluminum master cylinder construction
- Reservoir and master cylinder cap included
- Uses DOT 3 brake fluid
- Gasket or seal included
- Two mounting holes with 0.35-inch mounting hole diameter
Product Details
MPA Electrical NM2738 is a brake master cylinder engineered for hydraulic brake system service on the 1995 Jeep Wrangler with front disc brakes. It is built to OE-style specifications using tested manufacturing processes and is intended to restore braking performance after wear, internal leakage, or loss of pedal firmness. The aluminum body helps keep the unit lightweight, while the included reservoir, cap, and seal support a complete cylinder replacement. This part cross-references OE number 4761940 for the same application.
Common Issues This Part Can Address
- Low or sinking brake pedal
- Brake fluid bypass inside the master cylinder
- External fluid leakage at the cylinder body or seals
- Uneven or inconsistent brake pressure
- Reduced braking response in a 1995 Jeep Wrangler with front disc brakes
Installation Notes and Tips
Before installation, verify the vehicle is a 1995 Jeep Wrangler with front disc brakes and confirm bore size and mounting points match the original unit. Bench bleeding the master cylinder before connecting brake lines helps remove trapped air and speeds final brake system bleeding. Use DOT 3 brake fluid only, and inspect brake lines, fittings, and the booster interface for wear or contamination during service. Part number NM2738 is supplied without a brake booster, push rod, sensor, or mounting hardware.
Quality Assurance
MPA Electrical tests each brake master cylinder against OE specifications using controlled inspection and validation processes to support consistent braking performance after installation. NM2738 is a new standard replacement brake master cylinder for the 1995 Jeep Wrangler.
| Brand | MPA Electrical |
|---|---|
| Part Number | NM2738 |
| Position | New with front disc brakes |
| Mounting Hardware Included | No |
| Grade Type | Standard replacement |
| Gasket Or Seal Included | Yes |
| Mounting Hole Quantity | 2 |
| Master Cylinder Bore Diameter | 1 |
| Brake Booster Included | No |
| Master Cylinder Cap Included | Yes |
| Master Cylinder Material | Aluminum |
| Push Rod Included | No |
| Reservoir Included | Yes |
| Sensor Included | No |
| Mounting Hole Diameter | 0.35 |
| Mounting Bracket Included | No |
| Brake Pressure Switch(s) Included | No |
| Fluid Type | Dot 3 |
| Product Condition | New |
This part fits 1 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 1995 | Jeep | Wrangler | 4.0L | L6 | N/A | New with front disc brakes |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.