/live/media/MV/MV_NM55092A_Fro.jpg)
OE Quality
60-Day Returns
MPA Electrical NM55092A Brake Master Cylinder
Brake Master Cylinder for 1996 Toyota RAV4
Restore consistent brake pedal response with this MPA Electrical brake master cylinder for the 1996 Toyota RAV4 with front disc brakes. Built as a standard replacement, Part Number NM55092A is engineered to match OE specifications for dependable hydraulic performance right out of the box.
MPA Electrical’s New with front disc brakes product line focuses on direct-fit brake hydraulic replacements for specific vehicle applications. This NM55092A master cylinder is built with an aluminum body, plastic reservoir, included reservoir cap, and DOT 3 fluid compatibility for a service-ready replacement on the 1996 Toyota RAV4.
Key Features
- Fits 1996 Toyota RAV4, front disc brakes
- Standard replacement brake master cylinder
- Aluminum master cylinder construction
- Plastic reservoir with cap included
- 0.875 in. bore diameter
- Two mounting holes with 0.352 in. mounting hole diameter
- Gasket or seal included
- DOT 3 brake fluid type
- New condition
Detailed Description
MPA Electrical NM55092A is a brake master cylinder for the 1996 Toyota RAV4, front disc brakes, built to restore hydraulic braking performance in a direct replacement format. The unit is tested against OE specifications using controlled inspection and validation processes, helping ensure consistent brake pedal feel and proper fluid movement after installation. This part cross-references Toyota 4720142020 for the same application.
Common Problems This Part Can Address
- Low or inconsistent brake pedal response
- Internal hydraulic leakage in the master cylinder
- Brake fluid loss at the master cylinder assembly
- Soft or spongy pedal feel caused by worn hydraulic components
- Reduced braking performance on a 1996 Toyota RAV4 with front disc brakes
Installation Notes and Tips
Verify bore size, mounting hole layout, and reservoir configuration before installation. Bench bleeding is recommended before the master cylinder is installed on the vehicle to help remove trapped air from the hydraulic circuit. Use DOT 3 brake fluid and inspect the brake lines, booster interface, and seals for wear or contamination during service.
Quality Assurance
MPA Electrical tests each brake master cylinder against OE specifications using proprietary processes and strict protocols to support consistent fit and function. Part Number NM55092A is a new, standard replacement brake hydraulic component for the 1996 Toyota RAV4.
| Brand | MPA Electrical |
|---|---|
| Part Number | NM55092A |
| Position | New with front disc brakes |
| Reservoir Material | Plastic |
| Mounting Hardware Included | No |
| Grade Type | Standard replacement |
| Gasket Or Seal Included | Yes |
| Mounting Hole Quantity | 2 |
| Master Cylinder Bore Diameter | 0.875 |
| Brake Booster Included | No |
| Master Cylinder Cap Included | Yes |
| Master Cylinder Material | Aluminum |
| Push Rod Included | No |
| Reservoir Included | Yes |
| Sensor Included | No |
| Mounting Hole Diameter | 0.352 |
| Mounting Bracket Included | No |
| Brake Pressure Switch(s) Included | No |
| Fluid Type | Dot 3 |
| Product Condition | New |
This part fits 1 vehicles. Search below:
| Year | Make | Model | Transmission | Position | Notes |
|---|---|---|---|---|---|
| 1996 | Toyota | RAV4 | Automatic | N/A | New with front disc brakes |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.