/live/media/MV/MV_NM55529_Fro.jpg)
OE Quality
60-Day Returns
MPA Electrical NM55529 Brake Master Cylinder
Brake Master Cylinder for Scion xA and xB
Restore consistent brake pedal response with this new brake master cylinder from MPA Electrical. Built as a standard replacement for vehicles with front disc brakes, it is engineered for direct OE-style performance on 2004-2006 Scion xA and 2004-2006 Scion xB applications.
Part number NM55529 is a brake hydraulics component made from aluminum and filled with DOT 3 fluid compatibility requirements in mind. It is supplied with a gasket or seal and uses a 0.875-inch bore diameter for the specified brake system setup.
Key Features
- Brand: MPA Electrical
- Part number: NM55529
- Brake master cylinder for brake hydraulics service
- Standard replacement grade
- Aluminum master cylinder construction
- 0.875-inch bore diameter
- Gasket or seal included
- Designed for vehicles with front disc brakes
- Compatible with DOT 3 brake fluid
- New product condition
Detailed Description
MPA Electrical NM55529 is a replacement brake master cylinder engineered to restore braking performance by matching OE specifications through tested manufacturing processes and controlled quality checks. The aluminum body supports reliable hydraulic operation, while the 0.875-inch bore diameter and standard replacement design make it a practical choice for brake system repair on Scion xA and Scion xB models with front disc brakes. This part cross-references 4720752041 for the same application.
What It Helps Fix
- Low or inconsistent brake pedal feel
- Internal master cylinder leakage
- Brake fluid loss at the hydraulic unit
- Reduced braking response from worn seals
- Brake system performance issues on Scion xA and Scion xB
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and brake configuration before installation. This master cylinder does not include a reservoir, brake booster, push rod, mounting hardware, or mounting bracket, so reuse or source the required related components as needed. Bench bleeding is recommended before final installation, and the system should be filled and bled with DOT 3 brake fluid after mounting.
Quality Assurance
MPA Electrical tests brake master cylinders against OE specifications using proprietary processes and strict protocols to help ensure consistent braking performance out of the box. NM55529 is a new replacement part built for dependable hydraulic service on the listed Scion applications.
| Brand | MPA Electrical |
|---|---|
| Part Number | NM55529 |
| Position | New with front disc brakes |
| Mounting Hardware Included | No |
| Grade Type | Standard replacement |
| Gasket Or Seal Included | Yes |
| Mounting Hole Quantity | 2 |
| Master Cylinder Bore Diameter | 0.875 |
| Brake Booster Included | No |
| Master Cylinder Cap Included | No |
| Master Cylinder Material | Aluminum |
| Push Rod Included | No |
| Reservoir Included | No |
| Sensor Included | No |
| Mounting Hole Diameter | 0.370 |
| Mounting Bracket Included | No |
| Brake Pressure Switch(s) Included | No |
| Fluid Type | Dot 3 |
| Product Condition | New |
This part fits 6 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2006 | Scion | xA | N/A | New with front disc brakes |
| 2006 | Scion | xB | N/A | New with front disc brakes |
| 2005 | Scion | xA | N/A | New with front disc brakes |
| 2005 | Scion | xB | N/A | New with front disc brakes |
| 2004 | Scion | xA | N/A | New with front disc brakes |
| 2004 | Scion | xB | N/A | New with front disc brakes |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.