/live/media/MV/MV_NM55648_Fro.jpg)
OE Quality
60-Day Returns
MPA Electrical NM55648 Brake Master Cylinder
Brake Master Cylinder for Honda Accord
Restore consistent brake pedal response with this MPA Electrical brake master cylinder, part number NM55648. It is a standard replacement for 2013-2017 Honda Accord models with front disc brakes and is built with an aluminum body, plastic reservoir, and included cap and seal.
Key Features
- Fits 2013-2017 Honda Accord, front disc brakes
- Brake master cylinder with 0.818 bore diameter
- Aluminum master cylinder construction with plastic reservoir
- Reservoir included with cap and gasket/seal included
- Uses DOT 3 or DOT 4 brake fluid
- Two mounting holes; standard replacement grade
- MPA Electrical NM55648
Product Details
MPA Electrical NM55648 is a brake master cylinder engineered to restore hydraulic braking performance on the Honda Accord. The unit is tested against OE specifications using sample-based validation and controlled inspection processes to help deliver consistent pedal feel and braking response out of the box. This part cross-references Honda 46100T2FA01 and 46100T2FA02 for the same application.
For shoppers searching for a 2013-2017 Honda Accord brake master cylinder, this replacement matches the vehicle’s front disc brake configuration and provides the core hydraulic components needed for service work. The NM55648 part number is also useful when verifying the correct master cylinder before ordering.
Common Problems This Part Can Address
- Low or inconsistent brake pedal feel
- Internal master cylinder leakage
- Brake fluid loss at the master cylinder
- Reduced hydraulic pressure to the brake system
- Brake warning symptoms related to master cylinder wear
Installation Notes and Tips
Confirm the vehicle is a 2013-2017 Honda Accord with front disc brakes before installation. Bench bleeding the master cylinder before final assembly helps remove trapped air from the hydraulic circuit. Transfer any required components from the original system as needed, and verify the brake fluid type is DOT 3 or DOT 4. Mounting hardware, brake booster, push rod, sensor, and brake pressure switch are not included.
Quality Assurance
MPA Electrical uses OE sample references and proprietary test procedures to check each brake master cylinder against OE specifications. The NM55648 is a new standard replacement part built for direct hydraulic service on the Honda Accord platform.
| Brand | MPA Electrical |
|---|---|
| Part Number | NM55648 |
| Position | New with front disc brakes |
| Reservoir Material | Plastic |
| Mounting Hardware Included | No |
| Grade Type | Standard replacement |
| Gasket Or Seal Included | Yes |
| Mounting Hole Quantity | 2 |
| Master Cylinder Bore Diameter | 0.818 |
| Brake Booster Included | No |
| Master Cylinder Cap Included | Yes |
| Master Cylinder Material | Aluminum |
| Push Rod Included | No |
| Reservoir Included | Yes |
| Sensor Included | No |
| Mounting Hole Diameter | 0.358 |
| Mounting Bracket Included | No |
| Brake Pressure Switch(s) Included | No |
| Fluid Type | Dot 3 or dot 4 |
| Product Condition | New |
This part fits 5 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2017 | Honda | Accord | 2.4L | L4 | N/A | New with front disc brakes |
| 2016 | Honda | Accord | N/A | New with front disc brakes | ||
| 2015 | Honda | Accord | 3.5L | V6 | N/A | New with front disc brakes |
| 2014 | Honda | Accord | 3.5L | V6 | N/A | New with front disc brakes |
| 2013 | Honda | Accord | N/A | New with front disc brakes |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.