/live/media/MV/MV_NM55671_Fro.jpg)
OE Quality
60-Day Returns
MPA Electrical NM55671 Brake Master Cylinder
Brake Master Cylinder for Honda CR-V
Restore hydraulic braking performance with this new brake master cylinder from MPA Electrical. Built as a standard replacement for the 2012-2016 Honda CR-V with front disc brakes, part number NM55671 is engineered to match OE specifications for consistent pedal response and dependable brake pressure.
MPA Electrical’s New with front disc brakes product line focuses on direct-fit brake hydraulic components for vehicles that use front disc brake configurations. This NM55671 master cylinder is a new aluminum unit with a 0.878-inch bore, DOT 3 fluid compatibility, and a gasket or seal included for service-ready installation.
Key Features
- Fits 2012-2016 Honda CR-V, front disc brakes
- Standard replacement brake master cylinder
- Aluminum master cylinder construction
- 0.878-inch master cylinder bore diameter
- Gasket or seal included
- DOT 3 brake fluid type
- Two mounting holes with 0.364-inch mounting hole diameter
- New condition
Detailed Description
The NM55671 brake master cylinder is designed for Honda CR-V models from 2012 through 2016 equipped with front disc brakes. As the primary hydraulic component in the braking system, it converts pedal force into brake fluid pressure, helping restore firm pedal feel and predictable stopping performance. This part cross-references Honda OE numbers 46101-T0A-305 and 46101-T0A-315 for the same application. The NM55671 is a practical replacement choice for drivers searching for a 2012-2016 Honda CR-V brake master cylinder, Honda CR-V master cylinder replacement, or front disc brake hydraulic repair part.
What It Helps Solve
- Soft or spongy brake pedal feel
- Internal hydraulic leakage in the master cylinder
- Loss of consistent brake pressure
- Brake fluid seepage around the master cylinder body
- Reduced braking response during normal driving
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and brake configuration before installation. This master cylinder does not include a reservoir, cap, brake booster, push rod, sensor, brake pressure switch, mounting hardware, or mounting bracket. Use DOT 3 brake fluid and bleed the hydraulic system thoroughly after installation to remove trapped air and restore proper pedal feel.
Quality Assurance
MPA Electrical tests each brake master cylinder against OE specifications using controlled processes and reference samples to help ensure consistent hydraulic performance out of the box. The NM55671 is a new, standard replacement part built for direct service on the specified Honda CR-V applications.
| Brand | MPA Electrical |
|---|---|
| Part Number | NM55671 |
| Position | New with front disc brakes |
| Mounting Hardware Included | No |
| Grade Type | Standard replacement |
| Gasket Or Seal Included | Yes |
| Mounting Hole Quantity | 2 |
| Master Cylinder Bore Diameter | 0.878 |
| Brake Booster Included | No |
| Master Cylinder Cap Included | No |
| Master Cylinder Material | Aluminum |
| Push Rod Included | No |
| Reservoir Included | No |
| Sensor Included | No |
| Mounting Hole Diameter | 0.364 |
| Mounting Bracket Included | No |
| Brake Pressure Switch(s) Included | No |
| Fluid Type | Dot 3 |
| Product Condition | New |
This part fits 5 vehicles. Search below:
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2016 | Honda | CR-V | AWD | N/A | New with front disc brakes |
| 2015 | Honda | CR-V | AWD | N/A | New with front disc brakes |
| 2014 | Honda | CR-V | AWD | N/A | New with front disc brakes |
| 2013 | Honda | CR-V | AWD | N/A | New with front disc brakes |
| 2012 | Honda | CR-V | AWD | N/A | New with front disc brakes |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.