/live/media/MV/MV_WH510003_Fro.jpg)
OE Quality
60-Day Returns
MPA ElectricalPart #: WH510003
MPA Electrical WH510003 Wheel Bearing - Front or Rear
346 vehicles fit this part
Select your vehicle to confirm fitment
Verify this part fits before purchasing — free returns if it doesn't
$38.12Free Shipping
Free ShippingNo Cost to Continental U.S.
Free Returns*Wrong fit? No cost
60-Day ReturnsMoney back guarantee
*Free return shipping only qualifies if our fitment verification tool is used.
In Stock · Ready To Ship
Most orders ship same-day if ordered before 1pm CST.
OE Direct Replacement — Bolt-on fit, no modifications needed
Fitment: Audi, Ford, Kia, Mazda, Mercury, and Volkswagen, 323, A3, Beetle, Beetle Cabrio, Clasico, Escort, Golf, Golf City, Jetta, Jetta City, Miata, MX-3, Protege, Protege5, Sephia, Spectra, Tracer, TT, and TT Quattro
Easy Returns — Return within 60 days for a full refund
Fast Shipping — Most orders ship same business day before 1pm CST
Not what you need? See all Wheel Bearing options
Front Wheel Bearing for Volkswagen, Audi, Mazda, and Kia
MPA Electrical WH510003 is a new steel wheel bearing built for front or rear applications listed below. It is a quality-built hub and bearing component with a 2.913-inch hub pilot diameter, made for direct replacement service on select Volkswagen, Audi, Mazda, Ford, Mercury, and Kia vehicles.
- New wheel bearing from MPA Electrical
- Steel construction for durable service
- Hub pilot diameter: 2.913 inches
- No gasket or seal included
- Not greaseable
- Cross-references 2WB10003 and 19235793 for the same application
Detailed Product Information
WH510003 is a replacement wheel bearing for a wide range of import and domestic compact vehicles, including Volkswagen Beetle, Golf, Jetta, and Audi TT applications. It also covers select Mazda Miata, Protege, MX-3, and 323 models, plus certain Kia Spectra and Sephia vehicles. The steel bearing construction and new-condition status make it a practical service part for restoring smooth wheel rotation and proper hub support. This part number, WH510003, is listed across multiple front and rear fitments, including Volkswagen Beetle front wheel bearing service and Audi TT front or rear bearing applications where specified.
What This Wheel Bearing Helps Address
- Wheel noise from a worn or rough bearing
- Excessive hub play or looseness at the wheel
- Vibration or rumble during driving
- Uneven wheel rotation caused by bearing wear
- Service replacement after hub or bearing inspection
Fitment and Installation Notes
- Fits 2011-2015 Volkswagen Clasico, front
- Fits 2011 Volkswagen Beetle, front
- Fits 1998-2010 Volkswagen Beetle, front
- Fits 2010 Volkswagen Beetle Cabrio, front
- Fits 2007-2010 Volkswagen Golf City, front
- Fits 2007-2009 Volkswagen Jetta City, front
- Fits 2000-2006 Audi TT, front
- Fits 2000-2006 Audi TT Quattro, front
- Fits 2000-2006 Audi TT Quattro, rear
- Fits 1999-2006 Volkswagen Golf, front
- Fits 1999-2005 Mazda Miata, rear
- Fits 1999-2005 Volkswagen Jetta, front
- Fits 2002-2004 Kia Spectra, front
- Fits 1998-2003 Audi A3, front
- Fits 1991-2003 Ford Escort, front
- Fits 1990-2003 Mazda Protege, front
- Fits 2002-2003 Mazda Protege5, front
- Fits 2001 Kia Sephia, front
- Fits 2001 Kia Spectra, front
- Fits 1997-2000 Kia Sephia, front
- Fits 1991-1999 Mercury Tracer, front
- Fits 1990-1997 Mazda Miata, rear
- Fits 1994-1996 Kia Sephia, front
- Fits 1992-1996 Mazda MX-3, front
- Fits 1990-1995 Mazda 323, front
- Fits 1990-1991 Mazda Protege, rear
Follow the axle nut torque specifications listed for your exact vehicle and year. Several applications require a new nut or bolt during service, and some Audi and Volkswagen fitments call for specific tightening and re-tightening procedures. Verify hub pilot diameter, position, and torque values before installation. This part cross-references 2WB10003 and 19235793 for the same application.
Quality Assurance
MPA Electrical supplies this wheel bearing as a new, steel replacement component under its Quality-Built Hubs & Bearings line. The part is manufactured to match the listed fitments and service requirements for direct replacement use.
| Brand | MPA Electrical |
|---|---|
| Part Number | WH510003 |
| Gasket or Seal Included | No |
| Greaseable | No |
| Hub Pilot Diameter Inch | 2.913 |
| Material | Steel |
| Product Condition | New |
This part fits 346 vehicles. Search below:
| Year | Make | Model | Body Type | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|---|
| 2015 | Volkswagen | Clasico | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2014 | Volkswagen | Clasico | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2013 | Volkswagen | Clasico | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2013 | Volkswagen | Clasico | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2012 | Volkswagen | Clasico | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2012 | Volkswagen | Clasico | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2012 | Volkswagen | Clasico | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2011 | Volkswagen | Beetle | 2.5L | L5 | Front | Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees; Wheel Bearing | ||
| 2011 | Volkswagen | Beetle | 2.0L | L4 | Front | Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees; Wheel Bearing | ||
| 2011 | Volkswagen | Clasico | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2011 | Volkswagen | Clasico | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2011 | Volkswagen | Clasico | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2010 | Volkswagen | Beetle | 2.5L | L5 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2010 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2010 | Volkswagen | Beetle Cabrio | 2.5L | L5 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2010 | Volkswagen | Golf City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2010 | Volkswagen | Golf City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2009 | Volkswagen | Beetle | 2.5L | L5 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2009 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2009 | Volkswagen | Golf City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2009 | Volkswagen | Golf City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2009 | Volkswagen | Jetta City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2009 | Volkswagen | Jetta City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2008 | Volkswagen | Beetle | 2.5L | L5 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2008 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2008 | Volkswagen | Golf City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2008 | Volkswagen | Golf City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2008 | Volkswagen | Jetta City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2008 | Volkswagen | Jetta City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2007 | Volkswagen | Beetle | 2.5L | L5 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2007 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2007 | Volkswagen | Golf City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2007 | Volkswagen | Golf City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2007 | Volkswagen | Jetta City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2007 | Volkswagen | Jetta City | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2006 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2006 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2006 | Audi | TT Quattro | 3.2L | V6 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2006 | Audi | TT Quattro | 3.2L | V6 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2006 | Audi | TT Quattro | 3.2L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2006 | Audi | TT Quattro | 3.2L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2006 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2006 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2006 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2006 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2006 | Volkswagen | Beetle | 2.5L | L5 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2006 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2006 | Volkswagen | Beetle | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2006 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2006 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2006 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2006 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2006 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2006 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2005 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2005 | Audi | TT Quattro | 3.2L | V6 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2005 | Audi | TT Quattro | 3.2L | V6 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2005 | Audi | TT Quattro | 3.2L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2005 | Audi | TT Quattro | 3.2L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2005 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2005 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2005 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2005 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2005 | Mazda | Miata | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 174 ft-lbs / 235Nm, use new nut | ||
| 2005 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2005 | Volkswagen | Beetle | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2005 | Volkswagen | Beetle | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2005 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2005 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2004 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2004 | Audi | TT Quattro | 3.2L | V6 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2004 | Audi | TT Quattro | 3.2L | V6 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2004 | Audi | TT Quattro | 3.2L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2004 | Audi | TT Quattro | 3.2L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2004 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2004 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2004 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2004 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2004 | Kia | Spectra | Hatchback | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 279Nm | |
| 2004 | Mazda | Miata | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 174 ft-lbs / 235Nm, use new nut | ||
| 2004 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2004 | Volkswagen | Beetle | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2004 | Volkswagen | Beetle | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2004 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2004 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Audi | A3 | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2003 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2003 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2003 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2003 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2003 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2003 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2003 | Ford | Escort | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 2003 | Kia | Spectra | Hatchback | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 279Nm | |
| 2003 | Mazda | Miata | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 174 ft-lbs / 235Nm, use new nut | ||
| 2003 | Mazda | Protege | FWD | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 2003 | Mazda | Protege | FWD | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 2003 | Mazda | Protege5 | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 2003 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2003 | Volkswagen | Beetle | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2003 | Volkswagen | Beetle | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2003 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2003 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Audi | A3 | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2002 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2002 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2002 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2002 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2002 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2002 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2002 | Ford | Escort | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 2002 | Kia | Spectra | Hatchback | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 279Nm | |
| 2002 | Mazda | Miata | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 174 ft-lbs / 235Nm, use new nut | ||
| 2002 | Mazda | Protege | FWD | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 2002 | Mazda | Protege | FWD | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 2002 | Mazda | Protege5 | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 2002 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2002 | Volkswagen | Beetle | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2002 | Volkswagen | Beetle | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2002 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2002 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Audi | A3 | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2001 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2001 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2001 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2001 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2001 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2001 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2001 | Ford | Escort | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 2001 | Kia | Sephia | 1.8L | L4 | Front | To 07/14/2001 (74mm OD); Wheel Bearing; Axle Nut Torque Spec: 180 ft-lbs / 244Nm | ||
| 2001 | Kia | Spectra | Hatchback | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 180 ft-lbs / 244Nm | |
| 2001 | Mazda | Miata | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 174 ft-lbs / 235Nm, use new nut | ||
| 2001 | Mazda | Protege | FWD | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 2001 | Mazda | Protege | FWD | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 2001 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2001 | Volkswagen | Beetle | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2001 | Volkswagen | Beetle | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2001 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2001 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Audi | A3 | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2000 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2000 | Audi | TT | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2000 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2000 | Audi | TT Quattro | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2000 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2000 | Audi | TT Quattro | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighen bolt 147 ft-lbs / 200Nm and then tighen 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 2000 | Ford | Escort | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 2000 | Kia | Sephia | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 180 ft-lbs / 244Nm | ||
| 2000 | Mazda | Miata | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 174 ft-lbs / 235Nm, use new nut | ||
| 2000 | Mazda | Protege | FWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 2000 | Mazda | Protege | FWD | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 2000 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2000 | Volkswagen | Beetle | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2000 | Volkswagen | Beetle | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 2000 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Golf | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 2000 | Volkswagen | Jetta | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Audi | A3 | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 1999 | Ford | Escort | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1999 | Kia | Sephia | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 180 ft-lbs / 244Nm | ||
| 1999 | Mazda | Miata | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 174 ft-lbs / 235Nm, use new nut | ||
| 1999 | Mazda | Protege | FWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1999 | Mazda | Protege | FWD | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1999 | Mercury | Tracer | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1999 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 1999 | Volkswagen | Beetle | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 1999 | Volkswagen | Beetle | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 1999 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Volkswagen | Golf | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Volkswagen | Golf | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Volkswagen | Golf | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Volkswagen | Jetta | 2.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Volkswagen | Jetta | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loose and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1999 | Volkswagen | Jetta | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 148 ft-lbs / 200Nm, loosen and re-tighten to 37 ft-lbs. Then turn additional 60 degrees. | ||
| 1998 | Audi | A3 | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Use new bolt or nut. Bolt: tighten 147 ft-lbs / 200Nm, loosen 90 degrees, re-tighten bolt 147 ft-lbs / 200Nm and then tighten 90 degrees. Nut: Hub stamped 8N0 615: apply Audi locking fluid D185 400 A2 then tighten nut to 235Nm. | ||
| 1998 | Ford | Escort | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1998 | Kia | Sephia | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 180 ft-lbs / 244Nm | ||
| 1998 | Mazda | Protege | FWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1998 | Mazda | Protege | FWD | 1.5L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1998 | Mercury | Tracer | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1998 | Volkswagen | Beetle | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 1998 | Volkswagen | Beetle | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: Tighten 148 ft-lbs / 200Nm, loosen. Re-tighten to 37 ft-lbs / 50Nm and then turn additional 60 degrees | ||
| 1997 | Ford | Escort | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1997 | Kia | Sephia | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 180 ft-lbs / 244Nm | ||
| 1997 | Kia | Sephia | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 180 ft-lbs / 244Nm | ||
| 1997 | Mazda | Miata | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 159 ft-lbs / 217Nm, use new nut | ||
| 1997 | Mazda | Protege | FWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1997 | Mazda | Protege | FWD | 1.5L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1997 | Mercury | Tracer | 2.0L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1996 | Ford | Escort | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1996 | Ford | Escort | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1996 | Kia | Sephia | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 177 ft-lbs / 240Nm | ||
| 1996 | Kia | Sephia | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 177 ft-lbs / 240Nm | ||
| 1996 | Mazda | Miata | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 159 ft-lbs / 217Nm, use new nut | ||
| 1996 | Mazda | MX-3 | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1996 | Mazda | Protege | FWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1996 | Mazda | Protege | FWD | 1.5L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1996 | Mercury | Tracer | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1996 | Mercury | Tracer | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1995 | Ford | Escort | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1995 | Ford | Escort | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1995 | Kia | Sephia | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 177 ft-lbs / 240Nm | ||
| 1995 | Kia | Sephia | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 177 ft-lbs / 240Nm | ||
| 1995 | Mazda | 323 | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 205Nm | ||
| 1995 | Mazda | 323 | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 205Nm | ||
| 1995 | Mazda | Miata | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 159 ft-lbs / 217Nm, use new nut | ||
| 1995 | Mazda | MX-3 | 1.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1995 | Mazda | MX-3 | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1995 | Mazda | Protege | FWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1995 | Mazda | Protege | FWD | 1.5L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1995 | Mercury | Tracer | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1995 | Mercury | Tracer | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1994 | Ford | Escort | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1994 | Ford | Escort | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1994 | Kia | Sephia | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 177 ft-lbs / 240Nm | ||
| 1994 | Mazda | 323 | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 205Nm | ||
| 1994 | Mazda | 323 | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 205Nm | ||
| 1994 | Mazda | Miata | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 159 ft-lbs / 217Nm, use new nut | ||
| 1994 | Mazda | MX-3 | 1.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1994 | Mazda | MX-3 | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1994 | Mazda | Protege | FWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1994 | Mercury | Tracer | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1994 | Mercury | Tracer | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1993 | Ford | Escort | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1993 | Ford | Escort | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1993 | Mazda | 323 | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 205Nm | ||
| 1993 | Mazda | 323 | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 205Nm | ||
| 1993 | Mazda | Miata | 1.6L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 159 ft-lbs / 217Nm, use new nut | ||
| 1993 | Mazda | MX-3 | 1.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1993 | Mazda | MX-3 | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1993 | Mazda | Protege | FWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1993 | Mercury | Tracer | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1993 | Mercury | Tracer | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1992 | Ford | Escort | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1992 | Ford | Escort | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1992 | Mazda | 323 | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 205Nm | ||
| 1992 | Mazda | Miata | 1.6L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 159 ft-lbs / 217Nm, use new nut | ||
| 1992 | Mazda | MX-3 | 1.8L | V6 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1992 | Mazda | MX-3 | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1992 | Mazda | Protege | FWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1992 | Mercury | Tracer | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1992 | Mercury | Tracer | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1991 | Ford | Escort | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1991 | Ford | Escort | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1991 | Mazda | 323 | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 205Nm | ||
| 1991 | Mazda | 323 | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 205Nm | ||
| 1991 | Mazda | Miata | 1.6L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 159 ft-lbs / 217Nm, use new nut | ||
| 1991 | Mazda | Protege | FWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1991 | Mazda | Protege | 4WD | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 206Nm | |
| 1991 | Mazda | Protege | 4WD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1991 | Mercury | Tracer | 1.9L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1991 | Mercury | Tracer | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | ||
| 1990 | Mazda | 323 | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 205Nm | ||
| 1990 | Mazda | 323 | 1.6L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 205Nm | ||
| 1990 | Mazda | Miata | 1.6L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 159 ft-lbs / 217Nm, use new nut | ||
| 1990 | Mazda | Protege | FWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm | |
| 1990 | Mazda | Protege | AWD | 1.8L | L4 | Rear | Wheel Bearing; Axle Nut Torque Spec: 152 ft-lbs / 206Nm | |
| 1990 | Mazda | Protege | AWD | 1.8L | L4 | Front | Wheel Bearing; Axle Nut Torque Spec: 205 ft-lbs / 277Nm |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
192357932WB10003
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.