MPA Electrical WH510095 Wheel Bearing - Front

Front Wheel Bearing for Honda and Acura

MPA Electrical WH510095 is a new front wheel bearing built for select Honda and Acura applications. It uses a steel construction and an encoder-style ABS setup to support proper wheel speed signal operation on the listed vehicles.

Key Features

• New wheel bearing for front axle applications
• Steel construction for durable service
• Encoder-type ABS sensor interface
• No gasket or seal included
• Non-greaseable design
• Hub pilot diameter: 3.579 inch

Detailed Product Overview

This MPA Electrical wheel bearing, part number WH510095, is a Quality-Built Hubs & Bearings replacement for front-wheel applications on select Honda Accord, Accord Crosstour, Crosstour, and Acura TL and TSX models. It is engineered with an encoder ABS type and steel housing to match the requirements of the listed fitments. If you are replacing a worn front wheel bearing on a 2008-2011 Honda Accord or a 2009-2011 Acura TSX, WH510095 provides the correct application-specific design. This part cross-references OE numbers 44300-TA0-A51 and 44300-TA0-A61 for the same application.

What This Part Helps Address

• Front wheel noise caused by bearing wear
• ABS warning lights related to encoder signal issues
• Excessive wheel play or looseness at the hub
• Vibration or roughness from the front wheel end
• Restoring proper hub and bearing function after wear

Installation Notes and Fitment

Compatible With:

• Fits 2012-2015 Honda Crosstour, front; wheel bearing; axle nut torque spec: refer to OE service manual
• Fits 2014 Acura TL, front; wheel bearing; axle nut torque spec: refer to OE service manual
• Fits 2012-2014 Acura TSX, front; wheel bearing; axle nut torque spec: refer to OE service manual
• Fits 2012-2013 Acura TL, front; wheel bearing; axle nut torque spec: 181 ft-lbs / 245Nm
• Fits 2012 Honda Accord, front; wheel bearing; axle nut torque spec: refer to OE service manual
• Fits 2009-2011 Acura TL, front; wheel bearing; axle nut torque spec: 242 ft-lbs / 328Nm
• Fits 2009-2011 Acura TSX, front; wheel bearing; axle nut torque spec: 242 ft-lbs / 328Nm
• Fits 2008-2011 Honda Accord, front; wheel bearing; axle nut torque spec: 242 ft-lbs / 328Nm
• Fits 2010-2011 Honda Accord Crosstour, front; wheel bearing; axle nut torque spec: 242 ft-lbs / 328Nm

Verify axle nut torque against the OE service manual for the exact vehicle before installation. Confirm the encoder-style ABS requirement and hub dimensions before replacing the original part. WH510095 is listed for front position use only.

Quality Assurance

MPA Electrical supplies new replacement driveline components under its Quality-Built Hubs & Bearings line, with application-specific construction for the listed Honda and Acura fitments. Part number WH510095 is built to match the stated vehicle requirements and OE cross-reference applications.