MPA Electrical WH512389 Wheel Bearing and Hub Assembly - Rear

Overview

The MPA Electrical WH512389 wheel bearing and hub assembly is a new rear hub solution for the 2007 Nissan Altima. It is built with a steel flange, integrated seal, and five M12 x 1.25 wheel studs for a direct service replacement on the rear axle.

Key Features

• New wheel bearing and hub assembly for rear service
• Steel construction with a trapezoid flange shape
• Flange included with 4 bolt holes and 5 wheel studs
• Integrated gasket or seal included
• No ABS sensor included
• Hub pilot diameter: 3.305 in; flange diameter: 5.76 in

Detailed Description

WH512389 is a wheel bearing and hub assembly engineered for the rear position on the 2007 Nissan Altima. The assembly uses a steel flange design with a 2.716 in flange offset, a 5.76 in flange diameter, and an M12 x 1.25 stud pattern to match the specified application. The included seal helps complete the hub service, while the non-greaseable design keeps maintenance requirements straightforward. This part cross-references 43202-JA010 for the same application.

Common Uses

• Restoring proper wheel support when the hub assembly is worn
• Addressing wheel play or looseness at the rear hub
• Replacing a noisy or rough-turning wheel bearing assembly
• Correcting damaged wheel studs or flange-related wear

Installation Notes

Fits 2007 Nissan Altima, rear. Confirm flange dimensions, stud size, and hub pilot diameter before installation. The axle nut torque specification is not provided in the fitment data, so verify service information for the vehicle before assembly. WH512389 should be installed as a direct replacement for the listed application.

Quality Assurance

MPA Electrical identifies this product line as Quality-Built Hubs & Bearings, offering a new replacement hub assembly built for the specified fitment.