/live/media/MV/MV_WH512415_Fro.jpg)
OE Quality
60-Day Returns
MPA Electrical WH512415 Wheel Bearing and Hub Assembly - Rear
Rear Wheel Hub Assembly for Kia Borrego
MPA Electrical WH512415 is a rear wheel bearing and hub assembly built for 2009-2011 Kia Borrego models. It combines a steel hub with a 6-stud, M12 x 1.5 wheel mounting pattern and a 30-spline design for direct driveline service.
Quality-Built Hubs & Bearings construction supports a clean OE-style replacement for rear hub service on the Kia Borrego. The assembly includes the flange and seal, and the hub pilot measures 3.62 inches.
Key Features
- Fits 2009-2011 Kia Borrego, rear
- Part number WH512415
- 30 spline count
- 6 wheel studs with M12 x 1.5 thread size
- Steel construction
- Flange included with 4 bolt holes
- Gasket or seal included
- Hub pilot diameter: 3.62 inches
- Flange diameter: 5.485 inches
- Flange offset: 2.102 inches
Detailed Description
MPA Electrical WH512415 is a rear wheel bearing and hub assembly for the 2009, 2010, and 2011 Kia Borrego. It is built with a modified-rectangle flange, 4 flange bolt holes, and a 5.485-inch flange diameter for service replacement in the rear driveline and axle area. The assembly does not include an ABS sensor or wiring harness.
This part cross-references Hyundai/Kia OE number 52730-2J000 for the same application. Use WH512415 when replacing a worn rear hub on a Kia Borrego and when matching the original 30-spline, 6-stud configuration.
Common Replacement Reasons
- Rear wheel bearing noise or rough rotation
- Excessive play at the rear hub
- Damaged wheel studs or hub flange
- Seal wear at the hub assembly
- Service replacement for a 30-spline rear hub on Kia Borrego
Installation Notes
Confirm rear fitment before ordering and verify the 30-spline count, 6-stud pattern, and flange dimensions against the original part. For 2009-2011 Kia Borrego rear hub service, follow the vehicle service procedure and torque the axle nut to 199 ft-lbs / 270 Nm as specified in the fitment notes.
Quality Assurance
MPA Electrical supplies this hub assembly as a new replacement part under its Quality-Built Hubs & Bearings line. The steel construction, included seal, and OE-style dimensions support consistent fitment for rear hub replacement on the Kia Borrego.
| Brand | MPA Electrical |
|---|---|
| Part Number | WH512415 |
| Spline Quantity | 30 |
| Flange Included | Yes |
| Flange Bolt Hole Quantity | 4 |
| Flange Shape | Modified rectangle |
| Anti Lock Brake Sensor Included | No |
| Flange Offset | 2.102 |
| Flange Diameter | 5.485 |
| Flange Diameter Inch | 5.485 |
| Gasket or Seal Included | Yes |
| Greaseable | No |
| Hub Pilot Diameter Inch | 3.62 |
| Material | Steel |
| Product Condition | New |
| Spline Quantity | 30 |
| Stud Quantity | 6 |
| Wheel Stud Size MM | M12 x 1.5 |
| Wiring Harness Included | No |
This part fits 6 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2011 | Kia | Borrego | 4.6L | V8 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 199 ft-lbs / 270Nm |
| 2011 | Kia | Borrego | 3.8L | V6 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 199 ft-lbs / 270Nm |
| 2010 | Kia | Borrego | 4.6L | V8 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 199 ft-lbs / 270Nm |
| 2010 | Kia | Borrego | 3.8L | V6 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 199 ft-lbs / 270Nm |
| 2009 | Kia | Borrego | 4.6L | V8 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 199 ft-lbs / 270Nm |
| 2009 | Kia | Borrego | 3.8L | V6 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 199 ft-lbs / 270Nm |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.