/live/media/MV/MV_WH512562_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
MPA Electrical WH512562 Wheel Bearing and Hub Assembly - Rear
| Brand | MPA Electrical WH512562 |
|---|---|
| Position | Rear |
| Spline Quantity | 28 |
| Flange Included | Yes |
| Flange Bolt Hole Quantity | 4 |
| Flange Shape | Rectangle |
| Anti Lock Braking System Type | Encoder |
| Anti Lock Brake Sensor Included | Yes |
| Flange Bolt Hole Diameter | 4.11 |
| Flange Offset | 2.31 |
| Flange Diameter | 5.97 |
| Flange Diameter Inch | 5.97 |
| Gasket or Seal Included | Yes |
| Greaseable | No |
| Hub Pilot Diameter Inch | 3.22 |
| Material | Steel |
| Product Condition | New |
| Spline Quantity | 28 |
| Stud Quantity | 5 |
| Wheel Stud Size MM | M12 x 1.5 |
| Wiring Harness Included | No |
| Fits | Acura · 6 vehicles |
OE-style hub assembly. New steel construction with flange and encoder ABS sensor included.
Integrated sensor. Anti-lock brake sensor is included for a cleaner, simpler install.
Quality-built hubs & bearings. MPA Electrical backs this wheel bearing and hub assembly line.
Cross-references 42200-TZ7-A01 for the same application. See all 1.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Rear Wheel Hub Assembly for Acura TLX
MPA Electrical WH512562 is a rear wheel bearing and hub assembly built for 2015-2020 Acura TLX applications. It combines the hub, bearing, ABS encoder, and sensor into one service part for a direct rear axle repair on the Acura TLX.
Key Features
- Fits 2015-2020 Acura TLX, rear
- Wheel bearing and hub assembly with 28 splines
- Integrated ABS encoder and anti-lock brake sensor included
- Steel construction with flange included
- 5 wheel studs with M12 x 1.5 thread size
- Gasket or seal included for service replacement
- Direct interchange reference: 42200-TZ7-A01
Detailed Product Overview
This MPA Electrical WH512562 rear hub assembly is specified for the Acura TLX and is built around the listed OE-style dimensions and sensor configuration. It features a rectangular flange, 4-bolt flange pattern, 5.97-inch flange diameter, 3.22-inch hub pilot diameter, and 2.31-inch flange offset. The encoder-style ABS setup and included sensor support proper wheel speed signal transfer for rear wheel service on the Acura TLX.
MPA Electrical markets this part under its Quality-Built Hubs & Bearings line, focusing on replacement hub assemblies that match the application requirements of the vehicle. WH512562 is a practical choice when servicing rear wheel bearing noise, hub wear, or ABS-related wheel-end concerns on 2015-2020 Acura TLX models.
Common Repair Uses
- Rear wheel bearing noise or roughness
- Wheel hub play or looseness at the rear axle
- ABS warning light caused by hub sensor issues
- Damaged wheel studs or flange wear
- Service replacement for a worn Acura TLX rear hub assembly
Installation Notes
Verify rear fitment before ordering and confirm the vehicle uses the listed 28-spline, encoder-style hub configuration. The fitment note specifies an axle nut torque spec of 181 lb-ft for 2015-2020 Acura TLX rear applications. Inspect the mating surfaces, axle nut condition, and brake components during installation to complete the repair correctly.
Quality Assurance
MPA Electrical positions this part within its Quality-Built Hubs & Bearings product line, using steel construction and application-specific hub dimensions for a direct replacement on the Acura TLX. Part number WH512562 is cross-referenced to 42200-TZ7-A01 for the same application.
| Year | Make | Model | Submodel | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2020 | Acura | TLX | SH-AWD | 3.5L | V6 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 181 lb-ft |
| 2019 | Acura | TLX | SH-AWD | 3.5L | V6 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 181 lb-ft |
| 2018 | Acura | TLX | SH-AWD | 3.5L | V6 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 181 lb-ft |
| 2017 | Acura | TLX | SH-AWD | 3.5L | V6 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 181 lb-ft |
| 2016 | Acura | TLX | SH-AWD | 3.5L | V6 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 181 lb-ft |
| 2015 | Acura | TLX | SH-AWD | 3.5L | V6 | Rear | Wheel Hub Assembly; Axle Nut Torque Spec: 181 lb-ft |
| No rows match your filter. | |||||||