/live/media/MV/MV_WH515014_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
MPA Electrical WH515014 Wheel Bearing and Hub Assembly - Front
| Brand | MPA Electrical WH515014 |
|---|---|
| Position | Front |
| Spline Quantity | 27 |
| Flange Included | Yes |
| Flange Bolt Hole Quantity | 3 |
| Flange Shape | Triangle |
| Anti Lock Brake Sensor Included | No |
| Flange Bolt Hole Diameter | 4.761 |
| Flange Offset | 2.22 |
| Flange Diameter | 5.885 |
| Flange Diameter Inch | 5.885 |
| Gasket or Seal Included | Yes |
| Greaseable | No |
| Hub Pilot Diameter Inch | 3.936 |
| Material | Steel |
| Product Condition | New |
| Spline Quantity | 27 |
| Stud Quantity | 5 |
| Wiring Harness Included | No |
| Fits | Ford and Mazda · 5 vehicles |
New steel construction. Built as a wheel bearing and hub assembly for service replacement.
Sealed hub design. Includes a gasket or seal and is not greaseable.
OE-style fitment. Configured with a flange, 27 splines, and five studs.
Cross-references 2HF15014, 19241246 and YL5Z-1104B for the same application. See all 5.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
The MPA Electrical WH515014 wheel bearing and hub assembly is a new steel replacement built for front-end service where the hub and bearing are serviced as a unit. It is listed for select 2000 Ford Ranger, 2000 Mazda B3000, and 2000 Mazda B4000 front applications with the noted exclusions.
Key Features
- New steel wheel bearing and hub assembly for direct replacement service.
- Includes a flange, gasket or seal, and a 27-spline hub design.
- Five-stud flange with a triangular flange shape for the specified application.
- ABS sensor is not included.
- Non-greaseable design for sealed hub service.
Detailed Description
WH515014 is a quality-built hub and bearing assembly from MPA Electrical for front-wheel service on the listed Ford Ranger, Mazda B3000, and Mazda B4000 applications. The assembly uses a steel construction with a 5.885-inch flange diameter, 3.936-inch hub pilot diameter, and a 2.22-inch flange offset. This part cross-references Monroe Shocks & Struts (e.g., 2HF15014, 19241246) for the same application.
What It Helps Address
- Wheel-end noise caused by worn hub or bearing components.
- Excessive play or looseness at the front hub.
- Service replacement after hub bearing wear or damage.
- Loss of proper wheel support from a non-serviceable hub assembly.
Installation Notes
Fits 2000 Ford Ranger, front, excluding Pulse Vacuum Hub Locks. Fits 2000 Mazda B3000, front, excluding Pulse Vacuum Hub Locks. Fits 2000 Mazda B4000, front, excluding Pulse Vacuum Hub Locks. The notes indicate the wheel hub and bearing are non-serviceable and non-adjustable; if the retaining nut is removed, the hub and bearing must be replaced. Verify spline count, flange dimensions, and application notes before installation.
Quality Assurance
MPA Electrical identifies this part as a quality-built hub and bearing assembly. Part number WH515014 is also referenced as WH515014 in catalog listings for identification and ordering.
| Year | Make | Model | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2000 | Ford | Ranger | 4WD | 4.0L | V6 | Front | Exc. Pulse Vacuum Hub Locks; Wheel Hub Assembly; Axle Nut Torque Spec: The wheel hub & bearing are non- serviceable or non-adjustable. If the retaining nut is removed, the hub & bearing must be replaced. |
| 2000 | Ford | Ranger | 4WD | 3.0L | V6 | Front | Exc. Pulse Vacuum Hub Locks; Wheel Hub Assembly; Axle Nut Torque Spec: The wheel hub & bearing are non- serviceable or non-adjustable. If the retaining nut is removed, the hub & bearing must be replaced. |
| 2000 | Ford | Ranger | 4WD | 2.5L | L4 | Front | Exc. Pulse Vacuum Hub Locks; Wheel Hub Assembly; Axle Nut Torque Spec: The wheel hub & bearing are non- serviceable or non-adjustable. If the retaining nut is removed, the hub & bearing must be replaced. |
| 2000 | Mazda | B3000 | 4WD | 3.0L | V6 | Front | Exc. Pulse Vacuum Hub Locks; Wheel Hub Assembly; Axle Nut Torque Spec: The wheel hub & bearing are non- serviceable or non-adjustable. If the retaining nut is removed, the hub & bearing must be replaced. |
| 2000 | Mazda | B4000 | 4WD | 4.0L | V6 | Front | Exc. Pulse Vacuum Hub Locks; Wheel Hub Assembly; Axle Nut Torque Spec: The wheel hub & bearing are non- serviceable or non-adjustable. If the retaining nut is removed, the hub & bearing must be replaced. |
| No rows match your filter. | |||||||