MPA Electrical WH515034 Wheel Bearing and Hub Assembly - Front Left

Wheel Bearing and Hub Assembly Overview

The MPA Electrical WH515034 is a new wheel bearing and hub assembly built for direct replacement service on select heavy-duty applications. It combines the hub, bearing, flange, and ABS sensor-related components into one service part for a cleaner repair.

Fits 1998-1999 Dodge Ram 2500, front left. This application uses a 33-spline hub design, an included flange, and an included anti-lock brake sensor for sensor-type ABS systems.

Key Features

• New wheel bearing and hub assembly for service replacement
• 33-spline hub design for the specified application
• Steel construction for strength in demanding driveline use
• Included flange with 8 stud locations and 4 flange bolt holes
• ABS sensor included for sensor-type anti-lock brake systems
• Gasket or seal included for service-ready installation

Detailed Product Description

WH515034 is a quality-built hub and bearing assembly from MPA Electrical for the front left position on select Dodge Ram 2500 trucks. The assembly is engineered with a modified square flange shape, a 4.48-inch hub pilot diameter, and a steel body to match the specified fitment and mounting requirements. It is a practical replacement when the original hub bearing unit shows wear, noise, or ABS-related faults. The part number WH515034 is also useful when cross-checking service records or ordering the correct replacement again.

This part cross-references Monroe Shocks & Struts (e.g., 2HF15034, 19285105) for the same application.

What This Part Helps Address

• Wheel bearing noise or rough rotation
• Hub play or looseness at the wheel end
• ABS sensor faults tied to the hub assembly
• Flange or mounting wear at the hub interface
• Service replacement needs for the specified front left application

Installation Notes and Tips

Confirm the 33-spline configuration, flange dimensions, and sensor-type ABS setup before installation. For the listed Dodge Ram 2500 fitment, follow the vehicle service procedure and axle nut torque specification exactly, then tighten further as needed to align the cotter pin with the hole.

Quality Assurance

MPA Electrical identifies this as a quality-built hub and bearing assembly. Verify fitment by year, make, model, and position before installation to ensure the correct WH515034 application.