MPA Electrical WH520100 Wheel Hub Repair Kit - Front

Wheel Hub Repair Kit for Front Applications

MPA Electrical WH520100 is a new wheel hub repair kit built for front-wheel service on select Ford, Lincoln, and Mercury vehicles. It is a steel hub and bearing service component with a gasket or seal included, made for direct replacement work where the original front hub assembly has worn or failed.

Compatible With 1991-1995 Ford Taurus front, 1994-1995 Ford Sable front, 1991-1995 Mercury Sable front, and 1991-1995 Lincoln Continental front applications. This part number, WH520100, is also referenced for the same application as 2HF20100 and 19235982.

Key Features

• Wheel hub repair kit for front driveline service
• Steel construction for durable hub support
• Gasket or seal included
• 5-stud wheel mounting pattern with M12 x 1.50 wheel studs
• 26-spline hub configuration
• Hub pilot diameter: 1.653 inch
• Flange diameter: 5.422 inch
• Flange offset: 2.2
• New condition replacement part

Detailed Description

MPA Electrical WH520100 is a front wheel hub repair kit engineered for vehicles that use a 26-spline, 5-stud hub design. The steel hub body and included seal support a proper front-end repair where hub wear, bearing noise, or mounting issues have developed. For fitment-specific service, this part is listed for 1991-1995 Ford Taurus front, 1994-1995 Ford Sable front, 1991-1995 Mercury Sable front, and 1991-1995 Lincoln Continental front. The axle nut torque specification listed for these applications is 190 ft-lbs / 258 Nm.

WH520100 is a practical replacement choice when servicing the front hub on a Ford Taurus, Ford Sable, Mercury Sable, or Lincoln Continental within the listed model years. The part number WH520100 and cross-reference numbers 2HF20100 and 19235982 help confirm application matching during lookup and catalog verification.

What It Helps Address

• Front hub bearing noise or rough rotation
• Loose or worn wheel hub mounting surfaces
• Seal-related contamination at the hub assembly
• Wheel stud or hub interface wear on the front axle
• Service replacement for damaged front hub components

Installation Notes and Tips

Verify vehicle year, make, model, and front position before installation. Confirm the 26-spline configuration, 5-stud pattern, and M12 x 1.50 wheel stud specification against the original part. Follow the listed axle nut torque specification of 190 ft-lbs / 258 Nm for the applicable Ford Taurus, Ford Sable, Mercury Sable, and Lincoln Continental front applications. Inspect related suspension and axle components during service to ensure the repair is completed correctly.

Quality Assurance

MPA Electrical identifies this part as a quality-built hub and bearing replacement in new condition. The steel construction and included seal support consistent service use in the specified front-wheel applications.