/live/media/MV/MV_WH930270K_Fro.jpg)
MPA Electrical WH930270K Wheel Hub Repair Kit - Front
| Brand | MPA Electrical WH930270K |
|---|---|
| Position | Front |
| Flange Offset | 2.169 |
| Flange Diameter Inch | 5.619 |
| Gasket or Seal Included | No |
| Greaseable | No |
| Hub Pilot Diameter Inch | 1.576 |
| Material | Steel |
| Product Condition | New |
| Spline Quantity | 26 |
| Stud Quantity | 4 |
| Wheel Stud Size MM | M12 x 1.5 |
| Fits | Volvo · 10 vehicles |
Steel construction. Built for dependable strength in a wheel hub repair kit.
26-spline design. Matches the hub’s spline interface for a precise repair.
Quality-built hubs and bearings. A service kit from MPA Electrical.
Cross-references 30818024, 30884539 and 308845411 for the same application. See all 3.
Wheel Hub Repair Kit for Volvo Front Applications
MPA Electrical WH930270K is a new wheel hub repair kit built for front service on select Volvo S40 and Volvo V40 models. It uses a steel hub design with a 4-stud, M12 x 1.5 wheel pattern and 26 splines for the specified driveline application.
Quality-Built Hubs & Bearings is the manufacturer description for this part, and WH930270K is listed for front wheel hub service on 2000-2004 Volvo S40 and 2000-2004 Volvo V40 applications.
Key Features
- Front wheel hub repair kit for select Volvo S40 and Volvo V40 models
- Steel construction for hub service applications
- 26-spline design
- 4-stud wheel mounting pattern with M12 x 1.5 wheel studs
- Flange diameter: 5.619 inch
- Flange offset: 2.169 inch
- Hub pilot diameter: 1.576 inch
- New condition
Detailed Description
WH930270K is a front wheel hub repair kit engineered for Volvo driveline and axle service where the original hub assembly needs replacement. The steel hub body, 26-spline configuration, and 4-stud wheel interface support the specified front hub application on 2000-2004 Volvo S40 and 2000-2004 Volvo V40 models. This part cross-references Volvo OE numbers 30818024 and 30884539 for the same application.
Common Issues This Part Can Address
- Front wheel hub wear that can create noise or looseness
- Damaged wheel stud mounting surfaces
- Spline wear at the hub interface
- Hub fitment problems during front-end service
- Replacement needs after bearing or hub assembly failure
Installation Notes and Tips
Verify the vehicle year, model, and front position before installation. Confirm spline count, flange diameter, hub pilot diameter, and wheel stud size match the original hub assembly. Because no gasket or seal is included, inspect related sealing components during service and replace any worn parts separately. Proper torque procedures and clean mating surfaces are important for correct hub installation on Volvo S40 and Volvo V40 front applications.
Quality Assurance
MPA Electrical lists this part as a new component under the Quality-Built Hubs & Bearings description. WH930270K is specified for front hub service on the listed Volvo applications and is built to the stated dimensional and fitment requirements.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2004 | Volvo | S40 | 1.9L | L4 | Front | Wheel Hub |
| 2004 | Volvo | V40 | 1.9L | L4 | Front | — |
| 2003 | Volvo | S40 | 1.9L | L4 | Front | Wheel Hub |
| 2003 | Volvo | V40 | 1.9L | L4 | Front | — |
| 2002 | Volvo | S40 | 1.9L | L4 | Front | Wheel Hub |
| 2002 | Volvo | V40 | 1.9L | L4 | Front | — |
| 2001 | Volvo | S40 | 1.9L | L4 | Front | Wheel Hub |
| 2001 | Volvo | V40 | 1.9L | L4 | Front | — |
| 2000 | Volvo | S40 | 1.9L | L4 | Front | Wheel Hub |
| 2000 | Volvo | V40 | 1.9L | L4 | Front | — |
| No rows match your filter. | ||||||