/live/media/MV/MV_WH930552K_Fro.jpg)
OE Quality
60-Day Returns
MPA Electrical WH930552K Wheel Hub Repair Kit - Front
Front Wheel Hub Repair Kit for Mazda Protege
MPA Electrical WH930552K is a front wheel hub repair kit built for 2001-2003 Mazda Protege and 2002-2003 Mazda Protege5 applications. It is a new steel hub assembly with an included gasket or seal, made to match the fitment and service requirements of these front driveline applications.
Key Features
- Fits 2001-2003 Mazda Protege, front
- Fits 2002-2003 Mazda Protege5, front
- New steel construction for service replacement use
- Includes gasket or seal
- 26-spline hub design with 5 wheel studs
- Wheel stud size: M12 x 1.5
- Flange offset: 2.373 in.
- Flange diameter: 5.506 in.
- Hub pilot diameter: 1.576 in.
- Greaseable: No
- Wiring harness included: No
Detailed Description
WH930552K is a front wheel hub repair kit from MPA Electrical, listed as a Quality-Built Hubs & Bearings component. It is engineered for direct service on the front of 2001-2003 Mazda Protege and 2002-2003 Mazda Protege5 models, with steel construction, a 26-spline interface, five wheel studs, and an included gasket or seal for the repair process. This part cross-references Monroe Shocks & Struts (e.g., C100-33-060) for the same application. Use WH930552K when replacing a worn or damaged front hub on Mazda Protege or Mazda Protege5 vehicles and when matching the specified hub dimensions is important for proper fitment.
Common Repair Uses
- Front wheel hub noise caused by wear or damage
- Loose or rough wheel rotation at the hub
- Vibration or play traced to the front hub assembly
- Service replacement for a damaged Mazda Protege front hub
- Service replacement for a damaged Mazda Protege5 front hub
Installation Notes and Tips
Confirm front-position fitment before installation and verify spline count, stud size, flange dimensions, and hub pilot diameter against the original part. Inspect the mating surfaces, axle interface, and seal area during service, and replace any worn related components found during disassembly. WH930552K does not include a wiring harness and is not greaseable.
Quality Assurance
MPA Electrical lists this part as a new, quality-built hub and bearing service component. The steel construction and included seal support a straightforward replacement for the specified Mazda front applications.
| Brand | MPA Electrical |
|---|---|
| Part Number | WH930552K |
| Flange Offset | 2.373 |
| Flange Diameter Inch | 5.506 |
| Gasket or Seal Included | Yes |
| Greaseable | No |
| Hub Pilot Diameter Inch | 1.576 |
| Material | Steel |
| Product Condition | New |
| Spline Quantity | 26 |
| Stud Quantity | 5 |
| Wheel Stud Size MM | M12 x 1.5 |
| Wiring Harness Included | No |
This part fits 5 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2003 | Mazda | Protege | 2.0L | L4 | Front | |
| 2003 | Mazda | Protege5 | 2.0L | L4 | Front | |
| 2002 | Mazda | Protege | 2.0L | L4 | Front | |
| 2002 | Mazda | Protege5 | 2.0L | L4 | Front | |
| 2001 | Mazda | Protege | 2.0L | L4 | Front |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.