/live/media/NS/NS_471192_Fro.jpg)
National 471192 Wheel Seal - Front Inner or Rear
| Brand | National 471192 |
|---|---|
| Position | Front Inner |
| Footnote | Zero Duplication Part |
| Housing Bore (Inch) | 2.125 |
| Housing Bore (MM) | 53.980 |
| Inside Diameter | 1.375 |
| Inside Diameter | 34.930 |
| Material | Nitrile |
| Outside Diameter | 2.129 |
| Outside Diameter | 54.080 |
| Outside Diameter (Inch) | 2.129 |
| Outside Diameter (mm) | 54.080 |
| Part Description | Oil Seal |
| Redicoat | Yes |
| Series | 470000 |
| Shaft (Inch) | 1.375 |
| Shaft (MM) | 34.930 |
| Type | 47 |
| Unit of Dimension | Inch |
| Width (Inch) | 0.312 |
| Width (mm) | 7.920 |
| Fits | MG, Austin Healey, Volvo, Austin, Metropolitan, and Morris |
Nitrile construction. Provides dependable sealing performance in a wheel seal.
Redicoat finish. Helps the seal install smoothly and resist corrosion.
Zero duplication part. A direct-fit oil seal replacement for the application.
Cross-references Anchor 2901, Anchor 3566 and Autolite 106 for the same application. See all 185.
National 471192 Wheel Seal Overview
National 471192 is a wheel seal built for driveline and axle sealing applications where shaft fit, housing bore, and seal width must match precisely. It uses nitrile material with Redi-Coat protection and is identified as a zero-duplication part for direct replacement use.
Compatible With wheel seal applications that require a 1.375 in. shaft diameter, 2.125 in. housing bore, and 0.312 in. width. This National wheel seal is also referenced by part number 471192 for catalog and cross-check purposes.
Key Features
- Nitrile sealing material for common axle and wheel-end sealing needs
- Inside diameter: 1.375 in. / 34.930 mm
- Outside diameter: 2.129 in. / 54.080 mm
- Housing bore: 2.125 in. / 53.980 mm
- Width: 0.312 in. / 7.920 mm
- Redi-Coat surface treatment
- Series 470000, Type 47 construction
- Zero duplication part identification
Detailed Description
National 471192 is an oil seal style wheel seal engineered around exact dimensional requirements for axle and hub sealing. The seal’s nitrile construction is suited to routine sealing service, while the Redi-Coat finish supports installation handling and fit consistency. National has supplied sealing solutions for more than 75 years, and this part reflects that focus on dimensional accuracy and modern vehicle service needs.
For fitment-based searches, this part is commonly referenced for wheel seal replacement work on vehicles requiring the specified shaft and housing measurements. If you are sourcing a National 471192 replacement for axle service, verify the shaft, bore, and width dimensions against the original seal before installation. This part cross-references Wix 51254 for the same application.
What It Helps Address
- Gear oil seepage at the wheel end
- Contamination entering the hub or axle seal area
- Seal wear from age, heat, or mileage
- Loss of sealing integrity from incorrect dimensions
- Repeat service caused by mismatched replacement seals
Installation Notes and Tips
Clean the housing bore and shaft sealing surface before installation. Confirm the 1.375 in. shaft size, 2.125 in. housing bore, and 0.312 in. width match the original component. Inspect the hub, axle surface, and surrounding sealing area for scoring or corrosion before pressing the seal into place. Use proper installation tools to avoid distorting the seal lip or case.
Quality Assurance
National is a long-established sealing brand with a focus on premium sealing solutions and current-vehicle coverage. The 471192 wheel seal is built to dimensional specifications that support accurate replacement service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||