/live/media/NS/NS_471267_Fro.jpg)
National 471267 Manual Transmission Remote Control Seal
| Brand | National 471267 |
|---|---|
| Inside Diameter | 0.875 |
| Inside Diameter | 22.230 |
| Thickness | 0.250 |
| Thickness | 6.350 |
| Outside Diameter | 1.379 |
| Outside Diameter | 35.030 |
| Sealing Material | Nitrile |
| Footnote | Zero duplication part |
| Housing Bore (Inch) | 1.375 |
| Housing Bore (MM) | 34.930 |
| Material | Nitrile |
| Outside Diameter (Inch) | 1.379 |
| Outside Diameter (mm) | 35.030 |
| Part Description | Oil seal |
| Redicoat | Yes |
| Series | 470000 |
| Shaft (Inch) | 0.875 |
| Shaft (MM) | 22.230 |
| Type | 47 |
| Unit of Dimension | Inch |
| Width (Inch) | 0.250 |
| Width (mm) | 6.350 |
| Fits | Ford · 1 vehicle |
Nitrile seal material. Provides dependable sealing performance in a durable oil seal design.
Redicoat finish. Adds a protective coating for easier installation and added corrosion resistance.
Zero duplication part. Built as a direct-fit replacement in the National 470000 series.
Cross-references Anchor 2945, Anchor 2947 and AP Exhaust 48650 for the same application. See all 169.
Manual Transmission Remote Control Seal for Ford F-350
National 471267 is a manual transmission remote control seal built for sealing performance in drivetrain applications. It is specified for the 1973 Ford F-350 and uses nitrile sealing material with Redicoat treatment for dependable contact at the shaft and housing interface.
With a 0.875 in. shaft diameter, 1.375 in. housing bore, and 0.250 in. width, this oil seal is sized for the listed application and built around National’s long-running sealing expertise. If you are servicing a 1973 Ford F-350 manual transmission remote control seal location, part number 471267 provides a direct-fit reference for that repair.
Key Features
- Fits 1973 Ford F-350, N/A
- National part number 471267
- Nitrile sealing material for oil-resistant sealing performance
- Redicoat surface treatment
- Inside diameter: 0.875 in. / 22.230 mm
- Outside diameter: 1.379 in. / 35.030 mm
- Housing bore: 1.375 in. / 34.930 mm
- Width: 0.250 in. / 6.350 mm
- Part description: Oil Seal
- Zero duplication part
Detailed Description
National 471267 is a transmission sealing component engineered for the manual transmission remote control seal application on the 1973 Ford F-350. The seal’s nitrile construction is suited to oil exposure, while the Redicoat finish supports installation and sealing contact. Dimensions are listed in both inch and metric formats to help confirm fitment against the shaft and housing bore before service.
This part cross-references Standard Ignition 29442 for the same application. For technicians and restorers working on a Ford F-350, 471267 is a practical reference when replacing a worn transmission seal and restoring proper sealing at the remote control area.
What It Helps Fix
- Transmission oil seepage at the remote control seal area
- Fluid loss caused by a hardened or worn seal lip
- Contamination entering the transmission through a damaged seal
- Leak-related drivability concerns from low lubricant level
- Service issues during manual transmission resealing on a 1973 Ford F-350
Installation Notes and Tips
Verify the shaft diameter, housing bore, and seal width against the existing component before installation. Clean the sealing surface and housing thoroughly, and inspect the shaft for wear, scoring, or corrosion that could affect seal life. Proper alignment during installation is important to avoid damaging the nitrile sealing edge.
Quality Assurance
National has supplied sealing solutions for more than 75 years and continues to develop sealing components for current and legacy vehicle applications. Part number 471267 reflects that focus on dimensional accuracy and application-specific sealing performance.
| Year | Make | Model | Transmission | Position | Notes |
|---|---|---|---|---|---|
| 1973 | Ford | F-350 | Manual | N/A | — |
| No rows match your filter. | |||||