/live/media/NS/NS_513116_Ang.jpg)
OE Quality
60-Day Returns
National 513116 Wheel Bearing - Front or Rear
National 513116 Wheel Bearing
National 513116 is a wheel bearing built for driveline and axle service where precise fit and stable wheel support matter. This double row angular contact bearing is engineered to meet or exceed OE quality standards and is sized for applications that use a 30 mm bore and 60 mm outside diameter.
- Double row angular contact design for wheel-end load handling
- 30.000 mm bore and 60.000 mm outside diameter
- 37.000 mm width for OE-style dimensional fit
- Inner race radius: 3.000 mm
- Outer race radius: 0.500 mm
- National RWDB series, Type E-3
Application Details
This wheel bearing is identified by part number 513116 and is part of National’s premium bearing line. It is a direct-fit style component for wheel-end repair where the original bearing specification calls for a 1.181 in bore, 2.362 in outside diameter, and 1.457 in width. Cross-reference part numbers include SKF GRW120 and QWB677 for the same application. For vehicle-specific searches, use National 513116 when looking up wheel bearing replacement for select Honda Civic, Toyota Corolla, and Ford Focus wheel-end service applications only where the OE dimensions match.
Common Repair Uses
- Wheel noise or growling from a worn bearing
- Excessive wheel play or looseness at the hub
- Rough rotation during wheel-end inspection
- Replacement during hub or axle service
- Restoring proper wheel support after bearing wear
Installation Notes
Verify bore, outside diameter, width, and race dimensions before installation. Clean the hub and mating surfaces thoroughly, and inspect the spindle or hub for scoring, pitting, or heat damage. Press-fit bearing service should be performed with the correct tools to avoid damage to the races and rolling elements. Confirm the application by matching the OE bearing dimensions and service requirements for the vehicle.
Quality Assurance
National manufactures this bearing to exacting standards for lasting performance and extended bearing life. The 513116 wheel bearing is built to meet or exceed OE quality expectations for wheel-end service.
| Brand | National |
|---|---|
| Part Number | 513116 |
| Bore (Inch) | 1.181 |
| Bore (mm) | 30.000 |
| Design | Double row angular contact |
| Footnote | Gen1 |
| Inner Race Bore (Inch) | 1.181 |
| Inner Race Bore (MM) | 30.000 |
| Inner Race Radius (Inch) | 0.118 |
| Inner Race Radius (MM) | 3.000 |
| Inner Race Width (Inch) | 1.457 |
| Inner Race Width (MM) | 37.000 |
| Outer Race Outside Diameter (Inch) | 2.362 |
| Outer Race Outside Diameter (MM) | 60.000 |
| Outer Race Radius (Inch) | 0.020 |
| Outer Race Radius (MM) | 0.500 |
| Outer Race Width (Inch) | 1.457 |
| Outer Race Width (MM) | 37.000 |
| Outside Diameter (Inch) | 2.362 |
| Outside Diameter (mm) | 60.000 |
| Part Description | Wheel bearing |
| Series | Rwdb |
| Type | E-3 |
| Width (Inch) | 1.457 |
| Width (mm) | 37.000 |
This part fits 0 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.