/live/media/NS/NS_7537S_Fro.jpg)
OE Quality
60-Day Returns
National 7537S Wheel Seal - Front Inner
National 7537S Wheel Seal for Pontiac Acadian
The National 7537S wheel seal is a precision sealing solution for the front inner position on 1962-1963 Pontiac Acadian models. Built with nitrile material and sized to match the specified shaft, housing bore, and width dimensions, it helps maintain proper sealing at the wheel end of the driveline.
For buyers searching for a Pontiac Acadian front inner wheel seal, National 7537S offers the dimensional fit and sealing profile needed for this application. It is also referenced under cross-number applications such as Centric Parts 417.62030.
Key Features
- Part number: 7537S
- Wheel seal / oil seal for driveline and axle sealing applications
- Fits 1962-1963 Pontiac Acadian, front inner
- Nitrile sealing material for dependable fluid control
- Inside diameter: 1.500 in. (38.100 mm)
- Outside diameter: 2.066 in. (52.480 mm)
- Housing bore: 2.062 in. (52.370 mm)
- Width: 0.240 in. (6.100 mm)
- Series 7000, Type 24
Product Details
National has supplied sealing products for decades, and the 7537S is part of its 7000 series oil seal lineup. This seal is engineered around the listed dimensions to support a proper fit in the housing bore and on the shaft, making it a direct-match option for Pontiac Acadian front inner wheel seal service. If you are replacing a worn or leaking seal on a 1962-1963 Pontiac Acadian, National 7537S is the correct part number to verify against the original application.
This part cross-references Centric Parts 417.62030 for the same application.
Common Issues This Part May Address
- Gear oil or lubricant leakage at the wheel end
- Contamination entering the hub or bearing area
- Seal wear from age, heat, or mileage
- Loss of sealing performance caused by hardened or damaged rubber
- Service replacement for a Pontiac Acadian front inner wheel seal
Installation Notes and Tips
Confirm the shaft diameter, housing bore, and seal width before installation to ensure the 7537S matches the original specification. Inspect the sealing surface for scoring, corrosion, or wear before installing the new seal, and clean the bore thoroughly so the seal seats evenly. For best results, verify fitment against the vehicle position listed for 1962-1963 Pontiac Acadian, front inner.
Quality Assurance
National is recognized for sealing solutions and has supported the industry for more than 75 years. The 7537S reflects that experience with a dimensionally specific design for wheel seal service on the Pontiac Acadian application.
| Brand | National |
|---|---|
| Part Number | 7537S |
| Housing Bore (Inch) | 2.062 |
| Housing Bore (MM) | 52.370 |
| Inside Diameter | 1.500 |
| Inside Diameter | 38.100 |
| Material | Nitrile |
| Outside Diameter | 2.066 |
| Outside Diameter | 52.480 |
| Outside Diameter (Inch) | 2.066 |
| Outside Diameter (mm) | 52.480 |
| Part Description | Oil Seal |
| Series | 7000 |
| Shaft (Inch) | 1.500 |
| Shaft (MM) | 38.100 |
| Type | 24 |
| Unit of Dimension | Inch |
| Width (Inch) | 0.240 |
| Width (mm) | 6.100 |
This part fits 2 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1963 | Pontiac | Acadian | Front Inner | |
| 1962 | Pontiac | Acadian | Front Inner |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.