/live/media/N1/N1_850009_Fro.jpg)
OE Quality
60-Day Returns
Nissens 850009 Engine Cooling Fan Assembly
Nissens 850009 Engine Cooling Fan Assembly
The Nissens 850009 engine cooling fan assembly is built for thermal management in select Smart Fortwo applications. It features a 12-volt design, a single fan layout, a 13.3900-inch fan diameter, and a 7-blade configuration with a shroud included for direct cooling-system service.
Key Features
- Engine cooling fan assembly for select Smart Fortwo models
- 12-volt electrical design with 1 connector and 2-pin male terminal
- Single fan configuration with 7 blades
- Shroud included for proper airflow management
- Maximum output power: 192 W
- Control unit not included; regulator not included
Product Details
Nissens 850009 is an engine cooling fan assembly engineered for thermal efficiency and consistent airflow in the cooling system. Nissens develops thermal components with a focus on quality manufacturing and ongoing aftermarket coverage, and this assembly reflects that approach with the specified fan diameter, blade count, and 12V electrical setup. This part cross-references Bosch 0986338107 for the same application. It is a direct-fit style solution for Smart Fortwo cooling system service where the original fan assembly has failed or airflow performance has declined.
Fitment
- Fits 2015 Smart Fortwo, N/A
- Fits 2011-2012 Smart Fortwo, N/A
- Fits 2009 Smart Fortwo, N/A
- Fits 2013-2014 Smart Fortwo, N/A
- Fits 2010 Smart Fortwo, N/A
- Fits 2008 Smart Fortwo, N/A
Common Issues This Part Can Address
- Engine temperature rising during idle or low-speed driving
- Cooling fan not engaging when commanded
- Reduced airflow through the radiator and condenser area
- Noisy, weak, or inconsistent fan operation
- Cooling system performance loss after fan motor or assembly failure
Installation Notes
Verify connector style, 12-volt electrical requirements, and fan shroud clearance before installation. Confirm the vehicle application by year and model, especially for Smart Fortwo cooling fan replacement service. Inspect related wiring, connectors, and cooling-system components during installation to help ensure proper operation after replacement.
Quality Assurance
Nissens is a market-leading manufacturer of thermal and engine efficiency components, and its products are developed and manufactured to consistent quality standards under the Genuine Nissens Quality approach. Part number 850009 is built to meet the needs of select Smart Fortwo cooling applications.
| Brand | Nissens |
|---|---|
| Part Number | 850009 |
| 10411 | No |
| Voltage | 12 |
| Fan Quantity | 1 |
| Shroud Included | Yes |
| Connector Quantity | 1 |
| Terminal Gender | Male |
| Fan 1 Diameter | 13.3900 |
| Control Unit Included | No |
| Connector Pin Quantity | 2 |
| Fan Blade Quantity | 7 |
| Maximum Output Power | 192 |
| Regulator Included | No |
This part fits 8 vehicles. Search below:
| Year | Make | Model | Submodel | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|---|
| 2015 | Smart | Fortwo | Passion | 1.0L | L3 | GAS | N/A | Power_192_W |
| 2014 | Smart | Fortwo | Pure | 1.0L | L3 | GAS | N/A | |
| 2013 | Smart | Fortwo | Passion | 1.0L | L3 | GAS | N/A | |
| 2012 | Smart | Fortwo | Passion | 1.0L | L3 | GAS | N/A | Power_192_W |
| 2011 | Smart | Fortwo | Pure | 1.0L | L3 | GAS | N/A | Power_192_W |
| 2010 | Smart | Fortwo | Pure | 1.0L | L3 | GAS | N/A | |
| 2009 | Smart | Fortwo | Brabus | 1.0L | L3 | GAS | N/A | Power_192_W |
| 2008 | Smart | Fortwo | Passion Cabrio | 1.0L | L3 | GAS | N/A |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.