/live/media/N1/N1_891689_FRO.JPG)
Nissens 891689 A/C Compressor
| Brand | Nissens 891689 |
|---|---|
| Refrigerant Type | R1234yf |
| Oil Filled | Yes |
| Pulley Groove Quantity | 6 |
| Outside Pulley Diameter | 4.36 |
| Clutch Included | Yes |
| Compressor Type | Hv14 |
| Pulley Belt Type | Serpentine |
| Connector Pin Quantity | 3 |
| O-ring Quantity | 2 |
| O-rings Included | Yes |
| Voltage | 12 |
| Fits | Mazda · 20 vehicles |
OE-standard design. Built to OE standards for consistent HVAC service performance.
R1234YF refrigerant. Specified for modern refrigerant systems using R1234YF.
Clutch included. Includes the clutch and O-rings for service preparation.
Cross-references BDGF61450, BDGH61450 and MZBDGF61450 for the same application. See all 3.
OE-Standard A/C Compressor
This Nissens A/C compressor is built to OE standards for vehicles using R1234YF refrigerant. Part number 891689 is engineered for stable pumping performance, low noise, and reduced vibration in demanding HVAC service.
Compatible with Mazda 3, Mazda 3 Sport, CX-30, and CX-50 applications listed below, this compressor includes an integrated clutch and is oil filled for service preparation. The HV14 compressor design uses a 6-groove serpentine pulley, 12-volt operation, and a 3-pin connector for the specified fitments.
Key Features
- OE-standard compressor construction from Nissens
- Designed for R1234YF refrigerant systems
- HV14 compressor type with 6-groove serpentine pulley
- Clutch included with O-rings included
- Oil filled for service setup
- 12-volt electrical specification with 3-pin connector
Detailed Description
Nissens part number 891689 is an A/C compressor for Mazda HVAC systems that require R1234YF refrigerant. The compressor is built around critical components such as the pulley, clutch, hub, bearing, and wobble plate to support consistent output, quieter operation, and durability under load. It is a direct replacement style component for the listed Mazda 3, Mazda 3 Sport, CX-30, and CX-50 applications.
This part cross-references Monroe Shocks & Struts (e.g., BDGF61450, BDGH61450) for the same application.
What It Is Used For
- Restoring A/C compressor function when cooling output drops
- Addressing compressor noise, vibration, or pulley-related wear
- Replacing a compressor specified for R1234YF refrigerant service
- Correcting clutch or internal compressor performance issues
Installation Notes and Tips
Review the vehicle’s refrigerant specification before installation. The fitment notes state that the compressor is filled with shipping oil only and must be drained and refilled during service. Verify connector style, pulley configuration, and compressor type against the original unit before installation.
Quality Assurance
Nissens manufactures compressors to OE standards and tests them for high-stress operation. The design focus on the pulley, clutch, hub, bearing, and wobble plate supports consistent performance and durability in HVAC service.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Notes |
|---|---|---|---|---|---|---|
| 2025 | Mazda | 3 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2025 | Mazda | CX-30 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2025 | Mazda | CX-50 | 2.5L | L4 | GAS | Compressor filled with shipping oil only, must drain and refill |
| 2024 | Mazda | 3 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2024 | Mazda | CX-30 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2024 | Mazda | CX-50 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2023 | Mazda | 3 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2023 | Mazda | CX-30 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2023 | Mazda | CX-50 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2022 | Mazda | 3 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2022 | Mazda | 3 Sport | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2022 | Mazda | CX-30 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2021 | Mazda | 3 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2021 | Mazda | 3 Sport | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2021 | Mazda | CX-30 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2020 | Mazda | 3 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2020 | Mazda | 3 Sport | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2020 | Mazda | CX-30 | — | — | — | Compressor filled with shipping oil only, must drain and refill |
| 2019 | Mazda | 3 | 2.5L | L4 | — | Compressor filled with shipping oil only, must drain and refill |
| 2019 | Mazda | 3 Sport | 2.5L | L4 | — | Compressor filled with shipping oil only, must drain and refill |
| No rows match your filter. | ||||||