/live/media/VI/VI_9702706A_Lef.jpg)
Nugeon 97-02706A Disc Brake Caliper - Front Left
| Brand | Nugeon 97-02706A |
|---|---|
| Position | Front Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M8-1.25 x 35.3 |
| Bleeder Thread Size | M8-1.25 |
| Bracket Included | No |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Not applicable |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 1571 / 1572 |
| Inlet Fitting Type | Plug |
| Inlet Port Thread Size (mm) | M10-1.0 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 60 |
| Piston Material | Steel |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Product line | Reman Caliper w/ Installation Hardware |
| Fits | Mercedes-Benz · 2 vehicles |
Remanufactured caliper. Includes installation hardware for a ready-to-install replacement.
Cast iron construction. Provides durable braking performance with a rust-preventative finish.
Bleeder screw included. Comes with dust boots and two steel pistons.
Remanufactured Front Left Brake Caliper
Nugeon 97-02706A is a remanufactured disc brake caliper for the front left position on select Mercedes-Benz applications. It is built with a cast iron housing, steel pistons, and a rust preventative finish to support dependable brake system service on 1978-1979 Mercedes-Benz 300SD models with Bendix design calipers.
The Nugeon Reman Caliper w/ Installation Hardware line focuses on remanufactured hydraulic brake components that match the original caliper layout and mounting style. This 97-02706A unit includes the bleeder screw and brake pad installation hardware package noted in the product data, along with dust boots and a grey finish for service-ready replacement work.
- Fits 1978-1979 Mercedes-Benz 300SD, front left
- Remanufactured disc brake caliper for brake hydraulic repair
- Cast iron housing with steel pistons
- 2.0 in. / 60 mm piston diameter
- Bleeder screw included with M8-1.25 thread
- M10-1.0 inlet port thread size
- Rust preventative grey finish
- Dust boots included
- Housing cast numbers: 1571 / 1572
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Use Nugeon 97-02706A when replacing a worn or sticking front left disc brake caliper on a Mercedes-Benz 300SD. It matches the Bendix design noted in the fitment data and supports direct hydraulic brake service for the specified vehicle years. The remanufactured construction helps restore caliper function while keeping the original brake system configuration in place.
Common Problems This Caliper Can Address
- Brake fluid leakage at the caliper body or bleeder area
- Uneven braking caused by a sticking or seized piston
- Poor brake pedal response from a worn hydraulic caliper
- Brake drag from corrosion inside the caliper assembly
- Service issues on a front left Mercedes-Benz 300SD Bendix-style caliper
Installation Notes
Confirm the front left position, inlet thread size, and bleeder thread before installation. Inspect brake hoses, pads, and mounting surfaces for wear or contamination, and bleed the hydraulic system after installation to remove air from the brake circuit. Verify that the caliper casting numbers and Bendix design match the original application before final assembly.
Quality Assurance
Nugeon remanufactured brake calipers are rebuilt for brake hydraulic replacement service using application-specific core construction and service hardware details listed in the product data. Part number 97-02706A is specified for 1978-1979 Mercedes-Benz 300SD front left applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1979 | Mercedes-Benz | 300SD | Front Left | Bendix Design; Reman Caliper w/ Installation Hardware |
| 1978 | Mercedes-Benz | 300SD | Front Left | Bendix Design; Reman Caliper w/ Installation Hardware |
| No rows match your filter. | ||||