/live/media/VI/VI_9717825D_Ang.jpg)
Nugeon 97-17825D Disc Brake Caliper
| Brand | Nugeon 97-17825D |
|---|---|
| Position | Front Left, Front Right, Rear Left, and Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | 7/16-24 x 1.475 |
| Bleeder Screw Thread (in) | 7/16-24 |
| Bracket Included | No |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Not applicable |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 472-w |
| Inlet Fitting Type | Tube seat |
| Inlet Port Thread Size (in) | 7/16/2024 |
| Inlet Thread Size | 7/16/2024 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 3 |
| Piston 1 Outside Diameter (mm) | 64 |
| Piston Material | Aluminum |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Fits | — |
Remanufactured caliper. Includes installation hardware for a ready-to-install replacement.
Cast iron housing. Provides a durable foundation with a rust-preventative finish.
Dual-piston design. Uses aluminum pistons for responsive braking performance.
Remanufactured Disc Brake Caliper Overview
Nugeon 97-17825D is a remanufactured disc brake caliper with installation hardware for brake hydraulic service. It features a cast iron housing, grey rust-preventative finish, and a 3 in. aluminum piston with dust boots and a bleeder screw installed.
Built for direct brake caliper replacement work, this Nugeon reman caliper supports common service needs on vehicles such as Honda Civic and Toyota Corolla applications where the correct brake hydraulics match this part number.
Key Features
- Remanufactured disc brake caliper for brake hydraulic repair
- Cast iron housing with grey rust-preventative finish
- 3 in. aluminum piston with 2-piston design
- Bleeder screw included; tube seat inlet fitting
- Dust boots included for caliper sealing
- Brake pad installation hardware included where applicable
- Part number 97-17825D for catalog and service matching
Product Details
The Nugeon BrandLine reman caliper w/ installation hardware focuses on service-ready brake hydraulics. Part number 97-17825D uses a cast iron body with aluminum pistons and a rust-preventative finish to support replacement of a worn or leaking disc brake caliper. The housing cast number is 472-W, and the inlet uses a 7/16-24 tube seat thread specification. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Caliper Helps Address
- Brake fluid leakage from a damaged caliper housing or seal area
- Uneven braking caused by a sticking or seized piston
- Poor pedal response from a worn hydraulic caliper assembly
- Brake drag related to corrosion inside the caliper body
- Service issues during brake caliper replacement on Honda Civic and Toyota Corolla brake systems
Installation Notes
Verify caliper position, inlet thread size, and bleeder screw specification before installation. Transfer or replace brake pads as needed, and inspect brake hoses, banjo bolt sealing surfaces, and copper crush washers where applicable. After installation, bleed the brake system thoroughly and confirm proper pedal feel and wheel rotation.
Quality Assurance
Nugeon remanufactured brake calipers are rebuilt for brake service applications with attention to fit, sealing, and corrosion resistance. Part number 97-17825D is supplied as a remanufactured replacement caliper for hydraulic brake repair.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||