/live/media/VI/VI_9717876A_Ang.jpg)
Nugeon 97-17876A Disc Brake Caliper - Front Left
| Brand | Nugeon 97-17876A |
|---|---|
| Position | Front Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | 3/8-24 x 1 |
| Bleeder Screw Thread (in) | 3/8-24 |
| Bracket Included | No |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Not applicable |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Inlet Fitting Type | Plug |
| Inlet Port Thread Size (in) | 7/16/2024 |
| Inlet Thread Size | 7/16/2024 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 41 |
| Piston Material | Steel |
| Piston Quantity | 4 |
| Wear Sensors Included | No |
| Product line | Reman Caliper w/ Installation Hardware |
| Fits | Ford · 1 vehicle |
Remanufactured caliper. Restored for dependable brake hydraulic performance.
Cast iron construction. Provides a rigid, durable caliper body.
Hardware included. Comes with installation hardware where applicable.
Front Left Reman Caliper for 1967 Mustang
Nugeon 97-17876A is a remanufactured disc brake caliper for the front left position on the 1967 Ford Mustang. Built in a grey cast iron finish with rust preventative coating, it is configured for Kelsey-Hayes design applications with a 7/16 in inlet and included bleeder screw.
The Nugeon Reman Caliper w/ Installation Hardware line focuses on remanufactured brake hydraulics for direct-fit service replacement. This caliper follows the original-style layout for the 1967 Ford Mustang front left brake system and includes the brake pad installation hardware package noted by the manufacturer where applicable.
- Remanufactured disc brake caliper for front left use
- Grey cast iron housing with rust preventative finish
- Bleeder screw included; dust boots included
- 4-piston design with 2 in (41 mm) piston outside diameter
- 7/16-20 inlet thread size with plug-style inlet fitting
- Brake pad installation hardware package included where applicable
- Compatible with Kelsey-Hayes design front brake applications
Use Nugeon 97-17876A when replacing a worn or leaking front left caliper on a 1967 Ford Mustang. This part number, 97-17876A, is built for the original-style brake hydraulic setup and is a direct service option for Mustang front brake restoration or repair work. It also appears as a fitment-specific replacement for 1967 Ford Mustang front left Kelsey-Hayes design applications.
Common Problems This Caliper Can Address
- Brake fluid leakage from a worn caliper body or seal area
- Uneven front brake response caused by sticking pistons
- Reduced braking performance from corrosion inside the caliper
- Bleeder screw service issues on an aging brake hydraulic assembly
- Front left caliper replacement during brake system restoration
Installation Notes and Tips
Verify front left placement, Kelsey-Hayes design, and 7/16 in inlet thread size before installation. Inspect brake hoses, pads, and related hydraulic components for wear, and bleed the brake system after installation to remove trapped air. Confirm all sealing surfaces are clean and use the correct brake fluid for the vehicle application.
Quality Assurance
This remanufactured caliper is built from cast iron and finished with rust preventative coating for service use. Nugeon 97-17876A is a reman brake hydraulics component intended to restore proper caliper function on the 1967 Ford Mustang front left brake position.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1967 | Ford | Mustang | Front Left | Kelsey-Hayes Design, 7/16" Inlet; Reman Caliper w/ Installation Hardware |
| No rows match your filter. | ||||