Nugeon 97P06601A Disc Brake Caliper - Front Right

Overview

This Nugeon disc brake caliper is built for specific Tesla Model 3 applications and uses an aluminum housing with an E-coat finish for corrosion resistance. It includes a bleeder screw, dust boots, and caliper-and-pad hardware, and it is identified by part number 97P06601A.

Key Features

• Aluminum caliper casting with gray E-coat finish
• Four-piston design with aluminum pistons
• Banjo bolt inlet fitting and M10-1.0 thread size
• Bleeder screw included for serviceability
• Dust boots included to protect internal components
• Caliper and pad hardware included where applicable

Detailed Description

Part number 97P06601A is a disc brake caliper for the front right position on 2017-2020 Tesla Model 3 vehicles with 18-inch wheels and TechShield 360. The aluminum construction helps reduce weight compared with heavier cast designs, while the four-piston layout and 42 mm piston size provide the hydraulic force needed for disc brake operation. The caliper is finished in gray E-coat and uses a banjo bolt inlet with M10-1.0 threading for the brake line connection.

TechShield 360 is Nugeon’s product line for brake components built around protected finishes and service-ready hardware details. This caliper follows that approach with a bleeder screw, dust boots, and included pad installation hardware, making it a direct replacement option for the specified Tesla Model 3 application. Part number 97P06601A is also referenced as 97P06601A in catalog listings for the same application.

What It Is Used For

• Restoring brake hydraulic pressure at the front right wheel
• Replacing a worn or sticking caliper housing
• Addressing brake fluid seepage at the bleeder or inlet connection
• Correcting uneven pad contact caused by piston or seal wear

Installation Notes and Tips

Verify the vehicle has the listed 18-inch wheel and TechShield 360 application before ordering. Confirm the banjo bolt connection, M10-1.0 thread size, and front right position match the original part. Inspect brake pads, lines, and related hardware during installation, and bleed the brake system after replacement.

Quality Assurance

Nugeon identifies this caliper under its TechShield 360 line, which emphasizes protected finishes and service-ready brake hardware. The part is built with aluminum casting, aluminum pistons, and included dust boots for a complete service replacement.