/live/media/VI/VI_97P17643A_Ang.jpg)
Nugeon 97P17643A Disc Brake Caliper - Front Right
| Brand | Nugeon 97P17643A |
|---|---|
| Position | Front Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | 3/8-24 x 1 |
| Bleeder Screw Thread (in) | 3/8-24 |
| Bracket Included | No |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Not applicable |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 6609 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (in) | 3/8-24 x 1 |
| Inlet Thread Size | 3/8-24 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 3 |
| Piston 1 Outside Diameter (mm) | 66 |
| Piston Material | Phenolic |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Dodge · 6 vehicles |
Remanufactured caliper. Restored for dependable brake hydraulic performance.
Cast iron housing. Provides a rigid, durable foundation for braking force.
Hardware included. Comes with brake pad installation hardware and banjo bolt.
Front Right Disc Brake Caliper for Dakota
Nugeon TechShield 360 (tm) part number 97P17643A is a remanufactured front right disc brake caliper for 1991-1996 Dodge Dakota applications. It is built with a cast iron housing, a phenolic piston, and a rust preventative finish to support dependable brake system service on the front right corner.
For Dodge Dakota front brake repairs, 97P17643A provides the core caliper components needed for a direct replacement on the specified fitment. The TechShield 360 (tm) product line focuses on brake hydraulic service parts with corrosion-resistant finishing and application-specific remanufacturing details.
Key Features
- Remanufactured disc brake caliper
- Fits 1991-1996 Dodge Dakota, front right
- Grey caliper with rust preventative finish
- Cast iron housing with one 66 mm phenolic piston
- Bleeder screw included
- Dust boots included
- Banjo bolt inlet fitting
- Brake pad installation hardware included where applicable
- Housing cast number 6609
Detailed Description
This Nugeon brake caliper is engineered for front right service on the 1991-1996 Dodge Dakota and is identified by part number 97P17643A. It uses a 3/8-24 inlet thread with a banjo bolt connection, a 3/8-24 bleeder screw thread, and a single 3-inch phenolic piston for hydraulic actuation. The remanufactured design is paired with a rust preventative finish to help maintain the caliper surface during normal brake system use.
TechShield 360 (tm) is Nugeon’s brake hydraulics product line, covering remanufactured calipers built for application-specific replacement needs. This 97P17643A caliper is a practical choice when servicing a Dodge Dakota front right brake corner and replacing a worn or sticking unit.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Uneven front brake pad wear on the right side
- Brake drag caused by a sticking caliper piston
- Brake fluid seepage around the caliper body or bleeder area
- Reduced braking response from a worn hydraulic caliper
- Corrosion-related caliper service issues on the front axle
Installation Notes and Tips
Verify the banjo bolt inlet, 3/8-24 thread sizing, and front right position before installation. Transfer or replace brake pads and related components as needed, and bleed the brake system after installation to remove air from the hydraulic circuit. Confirm that the vehicle matches the listed 1991-1996 Dodge Dakota fitment before ordering.
Quality Assurance
This caliper is remanufactured to support brake system replacement on the listed application and is finished with rust preventative protection. Confirm all fitment details, including position and inlet thread specifications, against the original part before installation.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1996 | Dodge | Dakota | Front Right | TechShield 360 (tm) |
| 1995 | Dodge | Dakota | Front Right | TechShield 360 (tm) |
| 1994 | Dodge | Dakota | Front Right | TechShield 360 (tm) |
| 1993 | Dodge | Dakota | Front Right | TechShield 360 (tm) |
| 1992 | Dodge | Dakota | Front Right | TechShield 360 (tm) |
| 1991 | Dodge | Dakota | Front Right | TechShield 360 (tm) |
| No rows match your filter. | ||||