/live/media/VI/VI_97P17658B_Ang.jpg)
Nugeon 97P17658B Disc Brake Caliper - Front Left
| Brand | Nugeon 97P17658B |
|---|---|
| Position | Front Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | 3/8-24 x 1 |
| Bleeder Screw Thread (in) | 3/8-24 |
| Bracket Included | No |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Not applicable |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 7002 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.25 x 24 |
| Inlet Thread Size | M10-1.25 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 3 |
| Piston 1 Outside Diameter (mm) | 70 |
| Piston Material | Phenolic |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Dodge · 3 vehicles |
Remanufactured unit. A cost-conscious replacement for the disc brake caliper.
Cast iron housing. Provides a sturdy foundation with a rust-preventative finish.
Hardware included. Comes with brake pad installation hardware, banjo bolt, and copper crush washers where applicable.
Front Left Disc Brake Caliper for Dakota and Durango
This Nugeon TechShield 360 disc brake caliper is a remanufactured front left brake hydraulic replacement for select Dodge trucks and SUVs. It is built for 1999 Dodge Dakota and 1998-1999 Dodge Durango applications, with the part number 97P17658B used for direct identification.
The TechShield 360 line focuses on corrosion-resistant finishing and service-ready brake hydraulic components for everyday repair work. For buyers searching for a front left brake caliper for 1999 Dodge Dakota or 1998-1999 Dodge Durango, 97P17658B provides the key OE-style fitment details needed for a confident match.
Key Features
- Remanufactured disc brake caliper from Nugeon
- TechShield 360 product line with rust preventative finish
- Grey cast iron housing
- Phenolic piston with 3 in. / 70 mm outside diameter
- Bleeder screw included, 3/8-24 x 1 thread
- Dust boots included
- Banjo bolt inlet fitting with M10-1.25 inlet thread
- Brake pad installation hardware and copper crush washers included where applicable
- Housing cast number 7002
Detailed Description
Nugeon 97P17658B is a remanufactured front left disc brake caliper for select Dodge brake hydraulic applications. It uses a cast iron body with a phenolic piston, a rust preventative finish, and a bleeder screw already installed to support brake service on the front left corner. The TechShield 360 line adds a corrosion-focused finish approach for drivers and technicians looking for a replacement caliper that matches the original mounting and hydraulic connection style.
Compatible with 1999 Dodge Dakota, front left, and 1998-1999 Dodge Durango, front left, this caliper is a practical choice when replacing a leaking, sticking, or worn front brake caliper. The part number 97P17658B should be matched to the vehicle and position before ordering.
What This Caliper Helps Address
- Brake fluid leakage at the caliper body or bleeder area
- Uneven front brake pad wear on the left side
- Dragging or sticking front brake operation
- Corrosion-related caliper deterioration
- Reduced braking response caused by a worn hydraulic caliper
Installation Notes and Tips
Verify front left position, inlet thread size, and banjo bolt connection before installation. Inspect brake hoses, pads, and rotors for wear or damage during caliper replacement, and bleed the brake system after installation to remove air from the hydraulic circuit. Confirm the housing cast number and part number 97P17658B against the removed unit when possible.
Quality Assurance
This Nugeon TechShield 360 caliper is remanufactured for brake service applications and finished with rust preventative protection. It includes the listed hydraulic and service-related components shown in the product data for the specified fitment.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1999 | Dodge | Dakota | Front Left | TechShield 360 (tm) |
| 1999 | Dodge | Durango | Front Left | TechShield 360 (tm) |
| 1998 | Dodge | Durango | Front Left | TechShield 360 (tm) |
| No rows match your filter. | ||||