/live/media/VI/VI_97P17662A_Ang.jpg)
Nugeon 97P17662A Disc Brake Caliper - Front Right
| Brand | Nugeon 97P17662A |
|---|---|
| Position | Front Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | 3/8-24 x 1 |
| Bleeder Screw Thread (in) | 3/8-24 |
| Bracket Included | No |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Not applicable |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 7019, r |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.25 x 24 |
| Inlet Thread Size | M10-1.25 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 3 |
| Piston 1 Outside Diameter (mm) | 70 |
| Piston Material | Phenolic |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Dodge · 6 vehicles |
Remanufactured caliper. Restored for dependable brake service with a fresh rust-preventative finish.
Cast iron housing. Provides a sturdy foundation for consistent braking performance.
Hardware included. Comes with brake pad installation hardware, banjo bolt, and copper crush washers where applicable.
Front Right Brake Caliper for Dakota and Durango
This remanufactured Nugeon disc brake caliper is built for the front right position on select 2000-2002 Dodge Dakota and Dodge Durango models. Part number 97P17662A features a cast iron housing, phenolic piston, and rust-preventative finish for a direct brake hydraulics replacement.
Key Features
- Fits 2000-2002 Dodge Dakota, front right
- Fits 2000-2002 Dodge Durango, front right
- Remanufactured disc brake caliper from Nugeon TechShield 360
- Cast iron caliper body with grey rust-preventative finish
- Phenolic piston with 70 mm / 3 in. outside diameter
- Bleeder screw included; banjo bolt inlet fitting
- Dust boots included
- Brake pad installation hardware included where applicable
- Part number 97P17662A
TechShield 360 Product Line
Nugeon TechShield 360 is the brand line used for this remanufactured brake caliper application. It combines a cleaned and rebuilt caliper housing with corrosion-resistant finishing and replacement wear components to restore hydraulic braking function at the front right wheel position.
Detailed Description
Nugeon 97P17662A is a remanufactured front right disc brake caliper for 2000-2002 Dodge Dakota and 2000-2002 Dodge Durango models. It uses a single phenolic piston, a banjo bolt inlet connection, and an M10-1.25 inlet thread size. The caliper includes a bleeder screw and dust boots, and it is finished in grey with a rust-preventative coating to help protect the housing after installation. Housing cast numbers 7019 and R are listed for identification.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Use part number 97P17662A when matching the correct front right brake caliper for Dakota and Durango brake service.
Common Problems This Part Addresses
- Brake fluid leakage from a worn caliper housing or piston seal
- Uneven braking at the front right wheel
- Sticking or seized caliper piston movement
- Corrosion on the caliper body or bleeder area
- Brake pedal issues caused by hydraulic caliper wear
Installation Notes and Tips
Verify the front right position, inlet thread size, and banjo bolt connection before installation. Transfer or replace brake pads as needed, and inspect the brake hose, banjo bolt sealing surfaces, and copper crush washers where applicable. After installation, bleed the brake system thoroughly and check for leaks at the bleeder screw and inlet fitting.
Quality Assurance
This remanufactured caliper is built for brake hydraulics service on the listed Dodge applications and is supplied with key replacement components such as the bleeder screw and dust boots. Confirm fitment against the vehicle’s brake configuration and part number 97P17662A before ordering.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2002 | Dodge | Dakota | Front Right | TechShield 360 (tm) |
| 2002 | Dodge | Durango | Front Right | TechShield 360 (tm) |
| 2001 | Dodge | Dakota | Front Right | TechShield 360 (tm) |
| 2001 | Dodge | Durango | Front Right | TechShield 360 (tm) |
| 2000 | Dodge | Dakota | Front Right | TechShield 360 (tm) |
| 2000 | Dodge | Durango | Front Right | TechShield 360 (tm) |
| No rows match your filter. | ||||