/live/media/VI/VI_97P17695A_Generic.jpg)
Nugeon 97P17695A Disc Brake Caliper - Rear Right
| Brand | Nugeon 97P17695A |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M10-1.0 x 33 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | No |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Not applicable |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 26 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 51 |
| Piston Material | Phenolic |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Dodge · 2 vehicles |
Remanufactured caliper. Restored for dependable brake hydraulic performance.
Cast iron housing. Provides a rigid, durable foundation for braking force.
Rust preventative finish. Helps resist corrosion and keep the caliper looking cleaner.
Rear Right Brake Caliper for Dakota
Nugeon TechShield 360 (tm) part number 97P17695A is a remanufactured disc brake caliper for the rear right position on select 2003-2004 Dodge Dakota models. It is built with a cast iron housing, a grey rust-preventative finish, and a phenolic piston for dependable brake hydraulic performance.
Fits 2003-2004 Dodge Dakota, rear right. This application-specific caliper includes a bleeder screw and dust boots, and it is supplied with brake pad installation hardware, a banjo bolt, and copper crush washers where applicable. The 97P17695A is a direct-fit brake hydraulics replacement for the rear right side of the Dodge Dakota.
Key Features
- Remanufactured disc brake caliper for rear right brake service
- Fits 2003-2004 Dodge Dakota, rear right
- Cast iron housing with rust-preventative grey finish
- Phenolic piston with 51 mm outside diameter
- Bleeder screw included; M10-1.0 bleeder thread
- Banjo bolt inlet fitting with M10-1.0 inlet thread
- Dust boots included
- Brake pad installation hardware, banjo bolt, and copper crush washers included where applicable
Product Details
Nugeon TechShield 360 (tm) 97P17695A is a rear right disc brake caliper engineered for the 2003-2004 Dodge Dakota brake system. The remanufactured cast iron body is paired with a phenolic piston to support consistent hydraulic operation, while the rust-preventative coating helps protect the caliper housing in everyday driving conditions. This caliper is supplied without pads, brackets, or anti-squeal shims, making it a focused replacement for the hydraulic caliper assembly itself.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. The Nugeon part number 97P17695A is a practical choice when replacing a worn or sticking rear right caliper on a Dodge Dakota.
Common Problems This Part Can Address
- Rear right brake caliper sticking or dragging
- Brake fluid leakage at the caliper body or bleeder area
- Uneven rear brake wear on the Dodge Dakota
- Reduced braking response from a worn hydraulic caliper
- Corrosion-related caliper performance issues
Installation Notes
Verify rear right fitment before installation on 2003-2004 Dodge Dakota models. Transfer or replace any vehicle-specific brake components as needed during service, and confirm the banjo bolt and inlet thread sizes match the original brake line connection. After installation, bleed the brake system thoroughly and check for leaks at the bleeder screw and inlet fitting.
Quality Assurance
Nugeon TechShield 360 (tm) focuses on remanufactured brake hydraulics with corrosion-resistant finishing and application-specific hardware details. Part number 97P17695A is built for direct replacement use on the listed Dodge Dakota rear right brake position.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | Dodge | Dakota | Rear Right | TechShield 360 (tm) |
| 2003 | Dodge | Dakota | Rear Right | TechShield 360 (tm) |
| No rows match your filter. | ||||