Nugeon 99-00545A Disc Brake Caliper - Rear Right

Rear Right Reman Caliper for Pathfinder

Nugeon 99-00545A is a remanufactured disc brake caliper for the rear right position on 1988-1995 Nissan Pathfinder models. It is built with a cast iron housing, steel piston, and rust preventative finish to support dependable brake service on the Pathfinder rear brake system.

The Nugeon reman caliper line focuses on replacement calipers that restore hydraulic function while matching the original mounting and inlet style. Part number 99-00545A includes a mounting bracket, bleeder screw, dust boots, and caliper slides, making it a practical choice for rear brake repair on Nissan Pathfinder applications.

Key Features

• Fits 1988-1995 Nissan Pathfinder, rear right
• Remanufactured disc brake caliper with installation hardware
• Cast iron caliper body with grey rust preventative finish
• Single 43 mm steel piston for rear brake hydraulic operation
• Includes bracket, bleeder screw, dust boots, and caliper slides
• Banjo bolt inlet fitting with M10-1.0 inlet thread size
• Bleeder screw thread: M10-1.0; bleeder screw thread (in): 7/16-20

Detailed Description

This rear right brake caliper is engineered for Nissan Pathfinder models from 1988 through 1995 and uses a bracketed design with housing cast numbers AD14V, 1510, 18-15, and R. The caliper features a 2-inch (43 mm) piston, steel piston material, and dust boots to support proper hydraulic sealing and piston movement. Part number 99-00545A also uses a banjo bolt inlet with M10-1.0 thread sizing, which is important when matching the brake hose connection during service.

For buyers searching for a rear right Nissan Pathfinder brake caliper, reman caliper with bracket, or Pathfinder brake hydraulics replacement, this unit provides the core hardware needed for a direct brake repair on the specified application. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

What It Helps Repair

• Brake drag caused by a sticking rear caliper piston
• Uneven rear braking on the Nissan Pathfinder
• Brake fluid leakage at the caliper or bleeder area
• Corrosion-related caliper wear on older rear brake systems
• Noise or poor pedal response linked to caliper hydraulic issues

Installation Notes and Tips

Confirm the rear right position before installation and verify the banjo bolt connection, inlet thread size, and bleeder screw thread match the vehicle brake hose and service fittings. Inspect the mounting bracket, slides, and dust boots during installation, and bleed the brake system after the caliper is installed to remove trapped air. Because this caliper is remanufactured, compare the original core shape and bracket style to the replacement before assembly.

Quality Assurance

Nugeon reman calipers are rebuilt for brake service applications using a remanufactured housing, replacement wear components, and rust preventative finishing to support consistent fit and function on the specified Nissan Pathfinder rear brake position.