Nugeon 99-00676B Disc Brake Caliper - Front Right

Nugeon Front Right Reman Caliper

The Nugeon 99-00676B is a remanufactured disc brake caliper for front right applications on select Infiniti and Nissan models. It is built with a cast iron housing, steel pistons, and a rust preventative finish for a direct-fit brake hydraulic replacement.

This reman caliper w/ installation hardware line is focused on restoring proper brake function with the correct bracket, bleeder screw, slides, dust boots, and pad hardware where applicable. It is a practical choice for drivers searching for a front right brake caliper for Infiniti Q50, Infiniti Q60, Nissan Rogue, or Infiniti QX50 applications.

Key Features

• Remanufactured disc brake caliper for front right placement
• Cast iron housing with grey rust preventative finish
• Steel pistons with 2-piston design and 44 mm piston diameter
• Bracket included for listed applications
• Bleeder screw, caliper slides, dust boots, and hardware included
• Banjo inlet fitting with M10-1.0 inlet thread size
• Brake pad installation hardware included where applicable

Detailed Description

Nugeon part number 99-00676B is a reman caliper w/ installation hardware for the front right side. It is engineered around the listed OE-style casting numbers 4544 and 4547 and uses a 2-piston layout with a 1.732-inch (44 mm) piston diameter. The caliper includes the bracket, bleeder screw, slides, dust boots, and related hardware, and it uses a banjo inlet connection with M10-1.0 thread size.

Compatible With 2014-2023 Infiniti Q50, front right; 2017-2022 Infiniti Q60, front right; 2017-2019 Nissan Rogue, front right; 2016-2019 Nissan Rogue, front right; 2016-2017 Infiniti QX50, front right; and 2014-2015 Nissan Rogue, front right. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

What It Helps Address

• Brake fluid leakage at the caliper body or bleeder area
• Uneven front brake pad wear on the right side
• Sticking or seized caliper piston movement
• Corrosion on the caliper housing or bracket
• Noisy or inconsistent braking caused by worn hydraulic components

Installation Notes and Tips

Verify the front right position, bracket style, inlet thread size, and OE casting numbers before installation. Use the correct banjo bolt and copper crush washers where applicable, and bleed the brake system after installation to remove air from the hydraulic circuit. Confirm pad and rotor condition before returning the vehicle to service.

Quality Assurance

This Nugeon remanufactured caliper is rebuilt for the listed vehicle applications using a cast iron housing, steel pistons, and included service hardware. It is intended to provide a direct replacement option for brake service on select Infiniti Q50, Infiniti Q60, Nissan Rogue, and Infiniti QX50 models.