Nugeon 99-00878A Disc Brake Caliper - Front Left

Nugeon Reman Caliper for Front Left Applications

Nugeon 99-00878A is a remanufactured disc brake caliper with installation hardware for select front left applications. It is built with a grey rust-preventative finish, a single 60 mm steel piston, and an included bracket for the listed Hyundai and Kia vehicles.

The Nugeon Reman Caliper w/ Installation Hardware line focuses on direct-fit brake hydraulics service parts with the key mounting and service components needed for a proper caliper replacement. Part number 99-00878A is specified for front left use on several Hyundai Sonata, Kia Optima, Hyundai Kona Electric, Kia Niro EV, and related brake configurations.

• Remanufactured disc brake caliper for front left placement
• Includes bracket, caliper slides, dust boots, bleeder screw, and brake pad installation hardware
• Grey caliper with rust-preventative finish
• Single 60 mm steel piston
• Banjo inlet fitting with M10-1.0 inlet thread
• Brake pad FMSI number D1803
• Caliper manufacturer listed as Mobis

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

Use 99-00878A when servicing a front left disc brake caliper on 2019-2021 Hyundai Kona Electric, 2019-2021 Kia Niro EV, 2020 Kia Optima with manual parking brake, 2015-2019 Hyundai Sonata with 16-inch wheel notes, 2016-2019 Hyundai Sonata, 2016-2019 Kia Optima, or 2017-2018 Kia Optima with manual parking brake. These fitments are listed for the front left position only.

What This Caliper Helps Address

• Brake fluid leakage from a worn caliper body or piston seal
• Uneven braking caused by sticking caliper slides or piston movement
• Brake drag from corrosion inside the caliper assembly
• Poor pad contact from a damaged or worn mounting bracket
• Brake service needs on front left Hyundai Sonata, Kia Optima, Kona Electric, or Niro EV applications

Installation Notes and Tips

Confirm the vehicle’s front left brake configuration, inlet thread size, and banjo fitting style before installation. The package includes the bleeder screw and brake pad installation hardware where applicable, and the caliper is supplied with the bracket and slides already specified for the application. Verify pad shape against FMSI D1803 and match the listed fitment notes, including manual parking brake or 16-inch wheel requirements where shown.

Quality Assurance

This Nugeon reman caliper is rebuilt for brake hydraulic service with a rust-preventative finish, dust boots, and the listed hardware components for the application. Part number 99-00878A is cataloged as a remanufactured replacement caliper for the confirmed Hyundai and Kia fitments above.