Nugeon 99-01416B Disc Brake Caliper - Front Left

Nugeon Reman Caliper for Grand Vitara Front Left

The Nugeon 99-01416B is a remanufactured disc brake caliper with installation hardware for the front left position on select Suzuki Grand Vitara models. It is built with a cast iron housing, grey rust-preventative finish, and a 60 mm steel piston for direct brake service replacement.

Compatible with 2006-2013 Suzuki Grand Vitara, front left, this reman caliper includes a mounting bracket, bleeder screw, caliper slides, dust boots, and brake pad installation hardware where applicable. The Nugeon 99-01416B is a practical choice when replacing a worn or sticking front brake caliper on the Suzuki Grand Vitara.

Key Features

• Remanufactured disc brake caliper for front left brake service
• Fits 2006-2013 Suzuki Grand Vitara, front left
• Cast iron housing with rust-preventative grey finish
• 60 mm steel piston for hydraulic braking force
• Bracket included for the specified application
• Bleeder screw, caliper slides, and dust boots included
• Banjo bolt inlet fitting with M10-1.0 inlet thread
• M8-1.0 bleeder screw thread
• Brand line: Reman Caliper w/ Installation Hardware

Detailed Description

Nugeon part number 99-01416B is a remanufactured front left disc brake caliper engineered for the 2006-2013 Suzuki Grand Vitara. It uses a single 60 mm steel piston inside a cast iron body, with a rust-preventative grey finish to support long-term service in a demanding brake environment. The supplied bracket, bleeder screw, caliper slides, and dust boots help restore proper caliper operation during brake repair.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. If you are replacing a seized caliper, addressing uneven pad wear, or correcting brake drag on a Suzuki Grand Vitara front left brake corner, Nugeon 99-01416B provides the correct hydraulic and mounting configuration for the listed vehicle application.

What This Caliper Helps Fix

• Sticking or seized front left caliper movement
• Brake pull caused by uneven hydraulic clamping
• Uneven or accelerated front pad wear
• Brake drag from worn caliper slides or boots
• Bleeding issues related to a damaged caliper assembly

Installation Notes and Tips

Verify the front left position and confirm the banjo bolt inlet and M10-1.0 inlet thread before installation. Transfer or replace brake pads as needed, and inspect the brake hose, banjo bolt sealing surfaces, and copper crush washers during service where applicable. After installation, bleed the brake system thoroughly and check for leaks, pedal feel, and rotor contact before returning the vehicle to service.

Quality Assurance

This Nugeon remanufactured caliper is rebuilt for brake service applications and supplied with the listed hardware components for the specified fitment. It is intended as a direct replacement for the confirmed Suzuki Grand Vitara front left application covered by part number 99-01416B.