Nugeon 99-01841A Disc Brake Caliper - Front Left

Front Left Reman Brake Caliper for Kia Soul

Nugeon 99-01841A is a remanufactured disc brake caliper for the front left position on 2010-2013 Kia Soul models. It is built with a cast iron housing, grey rust-preventative finish, and a 57 mm steel piston for direct brake hydraulic service.

The Nugeon Reman Caliper w/ Installation Hardware line focuses on remanufactured brake hydraulics with the core service components needed for a proper caliper replacement. Part number 99-01841A follows that approach with a supplied mounting bracket, caliper slides, dust boots, and a bleeder screw for front-left Kia Soul brake repair.

Key Features

• Fits 2010-2013 Kia Soul, front left
• Remanufactured disc brake caliper for brake hydraulic replacement
• Cast iron housing with rust-preventative grey finish
• 57 mm steel piston for hydraulic actuation
• Includes mounting bracket, caliper slides, dust boots, and bleeder screw
• Banjo bolt inlet fitting with M10-1.0 inlet thread size
• Bleeder screw thread: M10-1.0 x 28
• Housing cast number BC141088

Detailed Description

Nugeon 99-01841A is a reman brake caliper engineered for the front left side of the 2010-2013 Kia Soul. It uses a single 57 mm steel piston inside a cast iron body, with a rust-preventative grey finish to help protect the housing during service. The caliper arrives with a bracket, slides, dust boots, and bleeder screw, and the inlet uses a banjo bolt connection with M10-1.0 thread sizing.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. If you are replacing a worn or sticking front left caliper on a Kia Soul, part number 99-01841A provides the hydraulic caliper assembly needed for that repair.

Common Repair Uses

• Restores braking performance when the original caliper is seized or dragging
• Addresses uneven front brake wear on the Kia Soul
• Replaces a leaking or corroded front left caliper assembly
• Corrects brake pull caused by caliper piston or slide issues
• Supports brake service when the bleeder or inlet connection is damaged

Installation Notes and Tips

Verify the front left position and confirm banjo bolt inlet fitment before installation. Transfer or replace copper crush washers where applicable, and inspect brake hoses, pads, and rotors for wear before returning the vehicle to service. Bleed the brake system after installation to remove air from the hydraulic circuit.

Quality Assurance

Nugeon remanufactured brake calipers are serviced for brake hydraulic replacement applications and built around the listed OE-style dimensions and hardware configuration. Part number 99-01841A is specified for 2010-2013 Kia Soul front left fitment.