Nugeon 99-01859B Disc Brake Caliper - Front Right

Front Right Reman Caliper for Sedona

Nugeon 99-01859B is a remanufactured disc brake caliper for the front right position on 2015-2021 Kia Sedona models. It is supplied with a mounting bracket and installation hardware details are built into the product configuration for the listed application.

This reman caliper uses a cast iron housing with a rust preventative finish and grey coating for added corrosion resistance. It features two steel pistons, a banjo inlet fitting, a bleeder screw, dust boots, and caliper slides to support proper brake operation on the Kia Sedona front right brake assembly.

Key Features

• Fits 2015-2021 Kia Sedona, front right
• Remanufactured disc brake caliper with bracket included
• Cast iron construction with rust preventative finish
• Grey caliper color with dust boots and caliper slides included
• Banjo inlet fitting with M10-1.0 inlet and bleeder threads
• Two steel pistons with 48 mm outside diameter
• Brake pad and caliper hardware included for the listed application
• Brake pad FMSI number D1814

Product Details

Nugeon 99-01859B is built for the front right brake position on the Kia Sedona and is a direct reman caliper replacement for 2015, 2016, 2017, 2018, 2019, 2020, and 2021 models. The caliper is manufactured by Mobis, uses a bracket with cast numbers YP HM2 and 6, and includes a bleeder screw with M10-1.0 x 28 thread specification. The housing cast numbers YP, 48, and HM1 help identify the application, while the banjo inlet and M10-1.0 port sizing support OE-style brake line connection details.

This part number, 99-01859B, is a practical choice when replacing a worn or sticking front right brake caliper on a Kia Sedona. It is also a useful reference when searching for a reman caliper with installation hardware for the same vehicle application.

Common Problems This Part Can Address

• Uneven front brake pad wear on the right side
• Brake drag caused by a sticking caliper piston or slide
• Brake fluid seepage at the caliper or bleeder area
• Corrosion on the caliper body or bracket
• Reduced braking response from a worn front right caliper assembly

Installation Notes

Verify the front right position, bracket style, inlet fitting type, and thread sizes before installation. Inspect the brake hose, pads, and rotor condition during replacement, and bleed the brake system after installation to remove air from the hydraulic circuit. Confirm that the pad shape matches FMSI D1814 for the listed Kia Sedona application.

For best results, compare the existing caliper casting numbers and bracket configuration to Nugeon 99-01859B before installation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

Quality Assurance

Nugeon reman calipers are rebuilt to restore brake function for the specified vehicle application, using a cast iron housing, new wear components where listed, and application-specific hardware details. Part number 99-01859B is configured for the front right brake position on the Kia Sedona and is intended to match the listed OE-style fitment requirements.