Nugeon 99-02426A Disc Brake Caliper - Rear Right

Reman Rear Right Brake Caliper

Nugeon 99-02426A is a remanufactured disc brake caliper for the rear right position, built with a cast iron housing, steel piston, and rust preventative finish. It is supplied with a mounting bracket, caliper slides, dust boots, bleeder screw, and brake pad installation hardware where applicable for a direct brake service replacement.

This reman caliper w/ installation hardware is a fitment-based replacement for BMW rear brake repairs, including BMW i8 and BMW 5 Series applications. The Nugeon 99-02426A part number is used for rear right brake service on vehicles that require an M10-1.0 inlet and a 44 mm piston caliper assembly.

Key Features

• Remanufactured disc brake caliper for rear right installation
• Cast iron housing with rust preventative finish
• 44 mm steel piston for hydraulic braking force
• Includes bracket, caliper slides, dust boots, and bleeder screw
• M10-1.0 inlet port and M10-1.0 bleeder thread
• Grey caliper finish; housing cast number 44/20
• Brake pad installation hardware included where applicable

Product Details

The Nugeon Reman Caliper w/ Installation Hardware line focuses on remanufactured brake hydraulics built for service replacement. Part number 99-02426A is a rear right disc brake caliper with one 44 mm piston, a bracket included, and a plug-style inlet fitting. It is listed for BMW i8 rear right applications and multiple BMW 528i, 528i xDrive, 535d, 535d xDrive, 535i, 535i xDrive, and ActiveHybrid 5 rear right applications. For BMW 535i and 535i xDrive 2011-2013, the fitment notes specify a 345 mm disc.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

Common Brake Issues This Part Can Address

• Brake drag or uneven rear braking at the right rear wheel
• Leaking caliper housing, bleeder area, or piston seal concerns
• Corrosion on the caliper body or slide components
• Reduced braking response from a worn hydraulic caliper assembly
• Service needs after pad and rotor replacement on BMW rear brake systems

Installation Notes

• Fits 2019-2020 BMW i8, rear right; 2014 BMW i8, rear right; and 2015-2017 BMW i8, rear right.
• Fits 2011-2016 BMW 528i, rear right; 2012-2016 BMW 528i xDrive, rear right; 2014-2016 BMW 535d, rear right; 2014-2016 BMW 535d xDrive, rear right; 2014-2016 BMW 535i, rear right; 2014-2016 BMW 535i xDrive, rear right; and 2012-2016 BMW ActiveHybrid 5, rear right.
• Fits 2011-2013 BMW 535i, rear right, with 345 mm disc; and 2011-2013 BMW 535i xDrive, rear right, with 345 mm disc.
• Verify the rear right position, inlet thread size, and brake hardware layout before installation.
• Bleeding the brake system after installation is required for proper pedal feel and hydraulic operation.

Quality Assurance

This remanufactured caliper is built with a rust preventative finish, dust boots, and a steel piston to support brake system service on BMW i8 and BMW 5 Series rear right applications. Nugeon part 99-02426A is prepared as a service replacement brake hydraulic component for confirmed fitment listings.