Nugeon 99-02736A Disc Brake Caliper - Front Right

Remanufactured Front Right Caliper for Mercedes-Benz 190E

This Nugeon remanufactured disc brake caliper is built for the front right position on select Mercedes-Benz 190E models. Part number 99-02736A is supplied with a mounting bracket and installation hardware details listed below, making it a direct-fit brake hydraulics replacement for the specified Girling-design applications.

Key Features

• Remanufactured disc brake caliper with one 54 mm (2 in.) piston
• Front right application for select 1984-1986 Mercedes-Benz 190E models
• Includes bracket, caliper slides, dust boots, and bleeder screw
• Cast iron housing with grey rust-preventative finish
• Inlet port thread size: M10-1.0
• Bleeder screw thread size: M8-1.25
• Package contents include brake pad installation hardware with banjo bolt and copper crush washers where applicable
• Part number 99-02736A

Product Details

Nugeon 99-02736A is a reman caliper w/ installation hardware for the front right brake position on Mercedes-Benz 190E applications. It uses a single steel piston, cast iron housing, and a rust-preventative grey finish for a service-ready replacement in the brake hydraulics system. The included bracket and slides support proper caliper mounting on the listed Girling-design vehicles, while the bleeder screw and dust boots are already in place for service convenience. This part number 99-02736A is listed for 1984-1985 Mercedes-Benz 190E front right and 1986 Mercedes-Benz 190E front right through 07/86.

What This Caliper Helps Address

• Sticking or seized front right brake caliper operation
• Uneven braking caused by worn piston seals or internal corrosion
• Brake fluid leakage at the caliper body or bleeder area
• Reduced braking response from a damaged or worn caliper assembly
• Brake service issues on Mercedes-Benz 190E front right applications

Installation Notes

Verify the vehicle’s brake design and production date before installation. This caliper is listed for 1984-1985 Mercedes-Benz 190E front right and 1986 Mercedes-Benz 190E front right to 07/86 with Girling design. Confirm the inlet thread size (M10-1.0) and bleeder screw thread size (M8-1.25) match the original setup, and inspect brake hoses, pads, and mounting surfaces before assembly. Part number 99-02736A should be installed with proper brake bleeding procedures after the hydraulic system is opened.

Quality Assurance

Nugeon remanufactured brake calipers are rebuilt for service replacement in brake hydraulics applications and inspected as part of the remanufacturing process. This unit is a remanufactured cast iron caliper assembly with the listed hardware and components for the specified Mercedes-Benz 190E fitments.