/live/media/VI/VI_9917354A_Ang.jpg)
Nugeon 99-17354A Disc Brake Caliper - Front Right
| Brand | Nugeon 99-17354A |
|---|---|
| Position | Front Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M10-1.0 x 32 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Cast Numbers | 5401 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | Ad54t, a922x |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 54 |
| Piston Material | Steel |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Fits | — |
Remanufactured caliper. Restored for dependable braking performance with a fresh service-ready build.
Cast iron construction. Delivers strong, rigid support for consistent brake feel.
Installation hardware included. Comes with brake pad hardware, banjo bolt, and copper crush washers where applicable.
Remanufactured Disc Brake Caliper Overview
Nugeon 99-17354A is a remanufactured disc brake caliper with installation hardware for brake hydraulic service where this application is specified. It features a cast iron housing, grey rust-preventative finish, dual 54 mm steel pistons, and a bracket included for a direct replacement-style repair.
Built for brake service on compatible vehicles such as Honda Civic and similar applications that use this caliper design, Nugeon 99-17354A helps restore hydraulic braking performance with the correct inlet and bleeder thread specifications. The reman caliper w/ installation hardware line focuses on service-ready brake hydraulics components for straightforward replacement work.
Key Features
- Remanufactured disc brake caliper with bracket included
- Cast iron housing with rust-preventative grey finish
- Dual steel pistons, 54 mm / 2 in. outside diameter
- Bleeder screw included
- Caliper slides included
- Dust boots included
- Banjo bolt inlet fitting
- Brake pad installation hardware included where applicable
- Part number: 99-17354A
Detailed Product Description
Nugeon 99-17354A is a remanufactured disc brake caliper engineered for brake hydraulic replacement where the original caliper uses a banjo bolt inlet, M10-1.0 inlet thread, and M10-1.0 bleeder thread. The unit includes a bracket, caliper slides, dust boots, and a bleeder screw, and it is finished with a rust-preventative coating to support long-term service in demanding brake environments. This part number, 99-17354A, is a practical choice when replacing a worn or sticking caliper on applications such as Honda Civic brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Brake drag caused by a sticking caliper piston or slide hardware
- Uneven braking from caliper wear or corrosion
- Soft or inconsistent brake pedal response related to caliper hydraulic leakage
- Brake noise caused by worn caliper components
- Reduced braking performance from damaged dust boots or seized hardware
Installation Notes and Tips
Verify caliper bracket cast number 5401 and housing cast numbers AD54T or A922X before installation. Confirm the inlet fitting type, bleeder thread size, and piston dimensions match the original brake setup on the vehicle. Bleed the brake system after installation and inspect all banjo bolt and copper crush washer sealing surfaces for proper fitment. This part number 99-17354A is intended for applications that use the specified caliper configuration, including Honda Civic brake repairs where the matching hardware and hydraulic connections are required.
Quality Assurance
This Nugeon remanufactured caliper is built as a service replacement brake hydraulics component with the listed hardware and sealing features for application-specific repair work. The remanufactured construction and rust-preventative finish support consistent fitment and dependable brake service when installed on the correct vehicle application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||