/live/media/VI/VI_9917361D_Ang.jpg)
Nugeon 99-17361D Disc Brake Caliper - Rear Left or Rear Right
| Brand | Nugeon 99-17361D |
|---|---|
| Position | Rear Left and Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | 7/16-24 x 1.38 |
| Bleeder Screw Thread (in) | 7/16-24 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 145513 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (in) | 7/16-24 x 1-1/7 |
| Inlet Thread Size | 7/16/2020 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 3 |
| Piston 1 Outside Diameter (mm) | 66 |
| Piston Material | Phenolic |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Fits | — |
Remanufactured caliper. Includes installation hardware for a ready-to-install replacement.
Cast iron housing. Provides durable braking performance with a rust-preventative finish.
Phenolic pistons. Help reduce heat transfer for more consistent operation.
Nugeon 99-17361D Reman Caliper Overview
The Nugeon 99-17361D is a remanufactured disc brake caliper with installation hardware for brake hydraulic service. It uses a cast iron housing, grey rust-preventative finish, and phenolic pistons to support consistent braking performance on the correct vehicle application.
Brand Line: Nugeon Reman Caliper w/ Installation Hardware identifies a remanufactured caliper program that includes the core caliper assembly and the brake pad installation hardware specified in the package contents, along with the banjo bolt and copper crush washers where applicable.
Key Features
- Remanufactured disc brake caliper for brake hydraulic replacement
- Cast iron housing with rust-preventative grey finish
- Phenolic piston design with 3 in. / 66 mm piston outside diameter
- Bleeder screw included for brake bleeding service
- Bracket included and caliper slides included
- Dust boots included to help protect internal components
- Banjo bolt inlet fitting type with copper crush washers where applicable
- Housing cast number 145513
Detailed Description
Nugeon part number 99-17361D is a reman caliper built for disc brake hydraulic applications where the original caliper uses a bracketed design and a banjo bolt inlet connection. The caliper features a cast iron body, phenolic pistons, and a rust-preventative finish to support dependable service in everyday braking systems. This unit is identified by housing cast number 145513 and includes the bleeder screw, dust boots, bracket, and slides specified in the product data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Use Nugeon 99-17361D when replacing a worn or sticking caliper on the matching vehicle application, including brake service for Honda Civic and related fitments where this caliper configuration is specified.
What This Caliper Helps Address
- Brake drag caused by a sticking caliper piston or slide
- Uneven pad wear from worn caliper hardware or guide components
- Brake fluid seepage at the bleeder screw or inlet connection
- Reduced braking response from a damaged or corroded caliper body
- Noisy or inconsistent braking from a failing hydraulic caliper assembly
Installation Notes and Tips
Confirm the inlet fitting type, bleeder screw thread size, piston diameter, bracket style, and housing cast number before installation. Inspect brake hoses, pads, and rotor condition during caliper replacement, and bleed the hydraulic system thoroughly after installation. Verify the vehicle uses the correct caliper position and mounting configuration before ordering or installing part number 99-17361D.
Quality Assurance
This remanufactured Nugeon caliper is built for brake service applications that require a replacement caliper with the specified hardware and hydraulic connection details. For fitment-specific use, confirm the vehicle application against the caliper configuration and part number 99-17361D before installation.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||