/live/media/VI/VI_99P00563A_Ang.jpg)
Nugeon 99P00563A Disc Brake Caliper - Front Left
| Brand | Nugeon 99P00563A |
|---|---|
| Position | Front Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (in) | 7/16-20 |
| Bleeder Screw Thread (mm) | M10-1.0 x 33 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 99w, t2, c, l |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 57 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | INFINITI and Nissan · 4 vehicles |
Remanufactured unit. Restored for dependable brake performance and value.
Cast iron housing. Provides a rigid foundation for consistent braking response.
Rust preventative finish. Helps resist corrosion and maintain a cleaner appearance.
Front Left Disc Brake Caliper for Maxima and I30
This Nugeon TechShield 360 disc brake caliper is a remanufactured front left replacement for select 2000-2001 Nissan Maxima and 2000-2001 INFINITI I30 applications. Part number 99P00563A is built around a cast iron housing with a grey rust-preventative finish for service-focused brake repair.
Key Features
- Remanufactured front left disc brake caliper
- Supplied with mounting bracket
- Cast iron housing with rust-preventative finish
- Steel piston with 57 mm outside diameter
- Bleeder screw included
- Caliper slides and dust boots included
- Banjo bolt inlet fitting
- Brake pad installation hardware included where applicable
Product Details
Nugeon TechShield 360 (tm) is the brand line used for brake components prepared with corrosion resistance in mind for everyday service conditions. This caliper, part number 99P00563A, uses a single steel piston and includes the bracket, slides, dust boots, and bleeder screw needed for a direct brake service on the front left corner. It is listed for the 2000-2001 Nissan Maxima and 2000-2001 INFINITI I30, making it a targeted replacement for vehicles with the matching brake hydraulics and mounting setup.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Sticking or seized caliper piston
- Uneven front brake pad wear
- Brake drag at the front left wheel
- Corrosion on the caliper body or slides
- Bleeding issues caused by a damaged caliper assembly
Installation Notes
Verify front left fitment before installation on the 2000-2001 Nissan Maxima or 2000-2001 INFINITI I30. Confirm the banjo bolt inlet, M10-1.0 inlet thread, and M10-1.0 bleeder thread match the original brake line and service hardware. Transfer or replace brake pads as needed, and bleed the hydraulic system after installation to remove air from the circuit. Part number 99P00563A is supplied with a mounting bracket, so compare the bracket style and caliper orientation to the original unit before bolting it in place.
Quality Assurance
Each Nugeon TechShield 360 caliper is remanufactured for brake service applications and finished with rust prevention to support long-term corrosion resistance. Part number 99P00563A is built with the listed hardware and component specifications to match the stated vehicle applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2001 | INFINITI | I30 | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Nissan | Maxima | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2000 | INFINITI | I30 | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2000 | Nissan | Maxima | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||