/live/media/VI/VI_99P00607A_Ang.jpg)
Nugeon 99P00607A Disc Brake Caliper - Front Right
| Brand | Nugeon 99P00607A |
|---|---|
| Position | Front Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (in) | 7/16-20 |
| Bleeder Screw Thread (mm) | M10-1.0 x 33 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 33, r |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 27.32 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 46 |
| Piston Material | Steel |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Nissan · 7 vehicles |
Remanufactured caliper. Restored for dependable braking performance and value.
Rust preventative finish. Helps resist corrosion for longer-lasting appearance.
Hardware included. Comes with caliper and pad hardware for easier installation.
Front Right Disc Brake Caliper for Nissan
This Nugeon TechShield 360 disc brake caliper is a remanufactured front right replacement for select Nissan Frontier and Nissan Xterra applications. Part number 99P00607A is built with a cast iron housing, dual steel pistons, and a rust preventative grey finish for service-focused brake repair.
Key Features
- Fits 2003-2004 Nissan Frontier, front right
- Fits 2000-2004 Nissan Xterra, front right
- Remanufactured disc brake caliper with bracket included
- Cast iron housing with rust preventative finish
- Dual 46 mm steel pistons for hydraulic braking force
- Bleeder screw included
- Caliper slides, dust boots, and pad hardware included
- Banjo bolt inlet fitting with M10-1.0 inlet thread size
- Grey caliper color with TechShield 360 protection
Product Details
The Nugeon TechShield 360 line focuses on brake hydraulics built for direct replacement service. This caliper uses a 2-inch piston design with steel piston construction, a bracket, and the hardware needed for caliper and pad installation where applicable. The inlet uses a banjo bolt connection, and the bleeder screw thread is M10-1.0, matching the listed hydraulic specifications for these Nissan front right applications. Part number 99P00607A is a practical choice when replacing a worn or sticking caliper on a Frontier or Xterra.
Common Brake Issues This Part Addresses
- Uneven front brake pad wear on the right side
- Brake drag caused by a sticking caliper piston or slide
- Hydraulic leakage at the caliper body or bleeder area
- Reduced braking response from a worn remanufactured unit
- Noisy or inconsistent front brake operation after caliper wear
Installation Notes
Verify front right fitment before installation on 2003-2004 Nissan Frontier and 2000-2004 Nissan Xterra models. Confirm banjo bolt connection, inlet thread size, and bleeder screw thread match the vehicle’s brake line and hydraulic setup. Inspect pads, rotors, and brake fluid condition during replacement, and bleed the brake system after installation to remove air from the circuit. Part number 99P00607A should be installed with attention to caliper orientation and bracket alignment.
Quality Assurance
Nugeon TechShield 360 calipers are remanufactured brake components built around the listed OE-style fitment and hydraulic specifications for Nissan Frontier and Nissan Xterra front right applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2004 | Nissan | Frontier | 3.3L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2004 | Nissan | Xterra | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2003 | Nissan | Frontier | 3.3L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2003 | Nissan | Xterra | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2002 | Nissan | Xterra | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Nissan | Xterra | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2000 | Nissan | Xterra | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||||