/live/media/VI/VI_99P00611A_Ang.jpg)
Nugeon 99P00611A Disc Brake Caliper - Front Right
| Brand | Nugeon 99P00611A |
|---|---|
| Position | Front Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (in) | 3/8-24 |
| Bleeder Screw Thread (mm) | M7-1.0 x 32 |
| Bleeder Thread Size | M7-1.0 |
| Bracket Cast Numbers | 4520 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 4520/20 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 44 |
| Piston Material | Steel |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | INFINITI and Nissan · 12 vehicles |
Remanufactured unit. Restored to deliver dependable braking performance with a fresh service life.
Cast iron housing. Provides a rigid foundation for consistent caliper operation.
Hardware included. Comes with caliper and pad hardware, slides, dust boots, and a bleeder screw.
Front Right Brake Caliper for Pathfinder and QX4
Nugeon TechShield 360 (tm) brake caliper Part Number 99P00611A is a remanufactured front right disc brake caliper built for specific Nissan Pathfinder and INFINITI QX4 applications. It includes a mounting bracket and is finished with a rust preventative coating for service-ready corrosion resistance.
Key Features
- Remanufactured cast iron disc brake caliper with grey finish
- Front right position with bracket included
- Two 44 mm steel pistons for hydraulic braking force
- Bleeder screw included with M7-1.0 thread
- Banjo bolt inlet with M10-1.0 inlet port thread size
- Caliper slides, dust boots, and brake pad installation hardware included
- TechShield 360 (tm) product line for corrosion-focused brake hydraulics service parts
Product Details
This Nugeon 99P00611A disc brake caliper is built for front right brake service on 2000-2004 Nissan Pathfinder, 1998-2003 INFINITI QX4, and 1999 Nissan Pathfinder from 12/98. It uses a cast iron housing, steel pistons, and a banjo bolt inlet connection to match the original brake hydraulic layout on these vehicles. The TechShield 360 (tm) line emphasizes a rust preventative finish and included protective components such as dust boots and slides for a complete caliper assembly. This part number 99P00611A is a direct-fit brake hydraulics replacement for the listed Pathfinder and QX4 applications.
Common Brake Issues This Caliper Can Address
- Uneven front braking caused by a sticking or seized caliper
- Brake fluid leakage at the caliper body or bleeder area
- Poor pad movement from worn slides or damaged dust boots
- Corrosion on the caliper housing affecting brake response
- Brake pull or inconsistent front right braking performance
Installation Notes and Tips
Verify front right fitment by year, make, model, and build date before installation. This caliper uses a banjo bolt inlet and M10-1.0 inlet thread size, so confirm the brake hose connection matches the vehicle application. Bleeding the brake system after installation is required, and the bleeder screw is included. Brake pads are not included, so inspect pad condition and replace as needed during service.
Quality Assurance
Nugeon TechShield 360 (tm) remanufactured brake components are processed for brake service applications with attention to fit, finish, and corrosion protection. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With 2000-2004 Nissan Pathfinder front right, 1998-2003 INFINITI QX4 front right, and 1999 Nissan Pathfinder front right from 12/98. Part Number 99P00611A is listed for these applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | Nissan | Pathfinder | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2003 | INFINITI | QX4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2003 | Nissan | Pathfinder | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2002 | INFINITI | QX4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2002 | Nissan | Pathfinder | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | INFINITI | QX4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Nissan | Pathfinder | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2000 | INFINITI | QX4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2000 | Nissan | Pathfinder | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1999 | INFINITI | QX4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1999 | Nissan | Pathfinder | Front Right | Supplied w/ Mounting Bracket; From 12/98; TechShield 360 (tm) |
| 1998 | INFINITI | QX4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||