/live/media/VI/VI_99P00630A_Ang.jpg)
Nugeon 99P00630A Disc Brake Caliper - Rear Right
| Brand | Nugeon 99P00630A |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (in) | 7/16-20 |
| Bleeder Screw Thread (mm) | M7-1.0 x 32 |
| Bleeder Thread Size | M7-1.0 |
| Bracket Cast Numbers | 3520 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 3520 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 1 |
| Piston 1 Outside Diameter (mm) | 35 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Nissan · 8 vehicles |
Remanufactured caliper. Restored to deliver dependable brake hydraulic performance.
Rust preventative finish. Helps resist corrosion for longer-lasting appearance.
Hardware included. Comes with brake pad installation hardware and banjo bolt.
Rear Right Brake Caliper for Nissan Rogue
This Nugeon TechShield 360 brake caliper is a remanufactured rear right disc brake caliper for select Nissan Rogue and Rogue Select models. Part number 99P00630A is built with a cast iron housing, grey rust-preventative finish, and included mounting bracket for the listed applications.
Key Features
- Fits 2008-2013 Nissan Rogue, rear right
- Fits 2014-2015 Nissan Rogue Select, rear right
- Remanufactured disc brake caliper with TechShield 360 protection
- Cast iron housing with rust-preventative grey finish
- Includes bracket, caliper slides, dust boots, hardware, and bleeder screw
- Single-piston design with 35 mm steel piston
- Banjo bolt inlet fitting with M10-1.0 inlet thread
Product Details
Nugeon 99P00630A is a rear right brake caliper assembly for Nissan Rogue and Nissan Rogue Select applications. The TechShield 360 line focuses on corrosion resistance and service-ready components, and this unit includes the bracket, slides, dust boots, and bleeder screw specified for the listed fitments. The caliper uses a 35 mm steel piston, cast iron construction, and a rust-preventative finish for dependable brake system service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues Addressed
- Rear brake drag caused by a sticking caliper piston or slide
- Uneven braking from a worn or seized rear right caliper
- Brake fluid seepage at the caliper body or bleeder area
- Corrosion-related caliper movement problems on Nissan Rogue rear brakes
- Noise or pedal inconsistency linked to caliper wear
Installation Notes
Verify rear right placement before installation and confirm the banjo bolt inlet and M10-1.0 thread match the vehicle brake hose connection. Transfer or replace pads as needed, and bleed the brake system after installation to remove air from the hydraulic circuit. Check rotor condition, slide movement, and brake fluid level during service. This caliper is listed for 2008-2013 Nissan Rogue and 2014-2015 Nissan Rogue Select rear right applications only.
Quality Assurance
As a remanufactured Nugeon brake hydraulics component, this caliper is processed for direct replacement use in the specified Nissan Rogue rear right applications. Part number 99P00630A is built to match the listed fitment and hardware configuration for service replacement.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2015 | Nissan | Rogue Select | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2014 | Nissan | Rogue Select | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2013 | Nissan | Rogue | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2012 | Nissan | Rogue | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2011 | Nissan | Rogue | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2010 | Nissan | Rogue | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2009 | Nissan | Rogue | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2008 | Nissan | Rogue | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||