/live/media/VI/VI_99P00630B_Ang.jpg)
Nugeon 99P00630B Disc Brake Caliper - Rear Left
| Brand | Nugeon 99P00630B |
|---|---|
| Position | Rear Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (in) | 7/16-20 |
| Bleeder Screw Thread (mm) | M7-1.0 x 32 |
| Bleeder Thread Size | M7-1.0 |
| Bracket Cast Numbers | 3520 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 3520 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 1 |
| Piston 1 Outside Diameter (mm) | 35 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Nissan · 8 vehicles |
Remanufactured caliper. Restored for dependable brake hydraulic performance.
Cast iron housing. Provides a rigid foundation with rust-preventative finish.
Hardware included. Comes with brake pad installation hardware and banjo bolt.
Rear Left Brake Caliper for Nissan Rogue
This Nugeon TechShield 360 remanufactured disc brake caliper is built for the rear left position on select Nissan Rogue and Rogue Select models. Part number 99P00630B includes a mounting bracket, bleeder screw, dust boots, caliper slides, and rust-preventative finish details for a direct brake hydraulics replacement.
Key Features
- Fits 2008-2013 Nissan Rogue, rear left
- Fits 2014-2015 Nissan Rogue Select, rear left
- Remanufactured cast iron caliper with grey rust-preventative finish
- TechShield 360 product line for brake hydraulic replacement applications
- Includes bracket, bleeder screw, dust boots, and caliper slides
- Banjo bolt inlet fitting with M10-1.0 inlet thread size
- Single steel piston with 35 mm outside diameter
- Brake pad installation hardware and banjo bolt/copper crush washers included where applicable
Detailed Description
Nugeon 99P00630B is a rear left disc brake caliper for Nissan Rogue and Nissan Rogue Select applications. It is remanufactured from cast iron and finished with a rust-preventative coating to support long-term service in brake hydraulic systems. The TechShield 360 line focuses on brake replacement components with the hardware and fit details needed for a proper rear caliper service.
This caliper uses a single steel piston, includes the bracket, and is configured with a banjo bolt inlet connection. The bleeder screw is included, along with dust boots and caliper slides. Part number 99P00630B is a direct-fit option for 2008-2013 Nissan Rogue rear left and 2014-2015 Nissan Rogue Select rear left brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Rear left brake caliper leakage at the piston or bleeder area
- Uneven rear braking caused by a sticking caliper
- Corrosion on the caliper housing or bracket
- Brake drag from worn slides or damaged dust boots
- Loss of hydraulic pressure at the rear left wheel
Installation Notes and Tips
Verify rear left fitment before installation on 2008-2013 Nissan Rogue and 2014-2015 Nissan Rogue Select models. Confirm the banjo bolt inlet, M10-1.0 thread size, and bracketed caliper configuration match the original part. Inspect brake hoses, pads, rotors, and mounting surfaces during service, and bleed the brake system after installation to remove air from the hydraulic circuit.
Quality Assurance
Nugeon TechShield 360 brake components are remanufactured to replace worn hydraulic calipers with application-specific fitment and service-ready hardware details. Part number 99P00630B is built for the listed Nissan Rogue rear left applications and follows the specified caliper, bracket, and piston configuration.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2015 | Nissan | Rogue Select | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2014 | Nissan | Rogue Select | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2013 | Nissan | Rogue | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2012 | Nissan | Rogue | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2011 | Nissan | Rogue | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2010 | Nissan | Rogue | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2009 | Nissan | Rogue | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2008 | Nissan | Rogue | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||